How to remove and install the rear Sway Bar Kit on Ford Ranger?

To remove the rear Sway Bar Kit you have to first unbolt the nut and washer that hold the bar ends to the link on each side. Following that, you need to undo the bolts of the retainers that are located on the rear axle housing and then make it easier to remove the mounting brackets, retainer along with the Sway Bar Kit from the vehicle. Check the rubber isolators present on the Sway Bar Kit and then change them if they are damaged. For installation, align the Sway Bar Kit over the rear axle assembly with the retainer presented over the bar having the UP mark. Place the Sway Bar Kit and the retainer on the brackets but like the previous one, it should be aligned UP towards the truck bed. Next soak the holes with liquid epoxy and next put in the U-bolts and the nuts and tighten it finger-tight. The Sway Bar Kit ends need to be moved into position and fitted to the links then fasten them, using bolt, washer, nut and tighten it to the required torque. Last but not, turn the retainer bolts and link nuts to the appropriate torque tightness.

Genuine Ford Ranger Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Sway Bar Kits found

View related parts
Ford Ranger Stabilizer Bar
Part Number: E2TZ-5486-A
$12.25 MSRP: $17.45
You Save: $5.20 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Bracket, Stabilizer Bar Bracket
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1983 Ford Ranger | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L | 3AT C3, 3AT C5, 4MT, 5MT
View related parts
Ford Ranger Roll Bar Assembly
Part Number: KB3Z-5482-A
$179.32 MSRP: $262.17
You Save: $82.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: BAR ASY - ROLL; Stabilizer Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 2 Whl L/H Rear Drive-High Ride, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
View related parts
Ford Ranger Bracket
Part Number: KB3Z-5486-A
$52.20 MSRP: $75.00
You Save: $22.80 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer Bar Bracket
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 2 Whl L/H Rear Drive-High Ride, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
View related parts
Ford Ranger Stabilizer Bar
Part Number: F87Z-5482-DA
$91.13 MSRP: $126.59
You Save: $35.46 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Stabilizer Bar
- Manufacturer Note: Stabilizer, 4x4,
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Ford Ranger | 4 Cyl 2.3L, 4 Cyl 2.3L NA Petrol, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L, 6 Cyl 4.0L SOHC EFI | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT, 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Ranger Roll Bar Assembly
Part Number: MB3Z-5482-U
$161.77 MSRP: $236.50
You Save: $74.73 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BAR ASY - ROLL; Stabilizer Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025 Ford Ranger | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Ranger LINKAGE
Part Number: EB3Z-5K898-A
$316.40 MSRP: $466.67
You Save: $150.27 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Pivot Arm
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025 Ford Ranger | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Roll Bar Assembly
Part Number: MB3Z-5482-V
$147.97 MSRP: $216.33
You Save: $68.36 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BAR ASY - ROLL; Stabilizer Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025 Ford Ranger | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger BAR - REAR AXLE
Part Number: MB3Z-5808-B
$156.75 MSRP: $229.17
You Save: $72.42 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lateral Rod, Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025 Ford Ranger | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Stabilizer Bar
Part Number: F87Z-5482-BA
Product Specifications
- Other Name: Bar - Stabilizer
- Manufacturer Note: Front Stabilzer, 4x2
- Replaced by: F87Z-5482-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Ford Ranger | 4 Cyl 2.3L, 4 Cyl 2.3L NA Petrol, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L, 6 Cyl 4.0L SOHC EFI | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT, 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Ranger Stabilizer Bar
Part Number: F87Z-5482-CA
$58.46 MSRP: $85.47
You Save: $27.01 (32%)
Product Specifications
- Other Name: Bar - Stabilizer; Stabilizer Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Ranger | 4 Cyl 2.3L NA Petrol, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Ranger BAR ASY-RR STAB
Part Number: E9TZ5A772C
Product Specifications
- Other Name: Stabilizer Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989 Ford Ranger | 4 Cyl 2.3L, 6 Cyl 2.9L | 4AT A4LD, 5MT
View related parts
Ford Ranger Stabilizer Bar
Part Number: E9TZ-5A772-B
Product Specifications
- Other Name: Bar - Stabilizer
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-2011 Ford Ranger | 4 Cyl 2.3L, 4 Cyl 2.3L NA Petrol, 4 Cyl 2.5L, 6 Cyl 2.9L, 6 Cyl 3.0L, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L, 6 Cyl 4.0L SOHC EFI | 4AT 4R44E, 4AT 4R55E, 4AT A4LD, 5AT 5R44E, 5AT 5R55E, 5MT, 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Ranger Stabilizer Bar
Part Number: 1L5Z-5482-CA
Product Specifications
- Other Name: Bar - Stabilizer
- Manufacturer Note: Front stabilizer , with heavy duty suspension
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Ranger | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT

Ford Ranger Sway Bar Kit

The Sway Bar Kit in Ford Ranger plays an efficient turning moment for better stability in handling of the vehicle and reduce body roll while cornering or in uneven terrain. This is an anti-roll bar that links opposite wheels with a torsion spring thus it has the capacity to enhance roll stiffness but not the vertical spring rates. In this way, the Sway Bar Kit prevents torsion, thus making the wheels to achieve similar heights of adjustment, the reduction of lateral tilt and enhancement of traction. Since the Ford Ranger is a vehicle that has been in production for many years, different types of Sway Bar Kit have been used in the car including the adjustable Sway Bar Kit and the active type Sway Bar Kit. These advanced Sway Bar Kits have the potential to allow the stiffness to be variable for the optimal of the car handling features as well as the comfort of riding. Although conventional Sway Bar Kits may allow bumps to communicate from one wheel to another causing the vehicle to waddle on rough roads, more recent designs seek to improve upon stability and comfort hence proving the advancement of Ford Ranger's suspension technology.

We provide a wide range of Ford Ranger Sway Bar Kit at the optimal prices. If you need Ford Ranger Sway Bar Kit, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Ford Ranger Sway Bar Kit Parts Questions & Experts Answers

Stabilizer Bar
F87Z-5482-CA
Q: How to remove and install the rear Sway Bar Kit on Ford Ranger?
A:
To remove the rear Sway Bar Kit you have to first unbolt the nut and washer that hold the bar ends to the link on each side. Following that, you need to undo the bolts of the retainers that are located on the rear axle housing and then make it easier to remove the mounting brackets, retainer along with the Sway Bar Kit from the vehicle. Check the rubber isolators present on the Sway Bar Kit and then change them if they are damaged. For installation, align the Sway Bar Kit over the rear axle assembly with the retainer presented over the bar having the UP mark. Place the Sway Bar Kit and the retainer on the brackets but like the previous one, it should be aligned UP towards the truck bed. Next soak the holes with liquid epoxy and next put in the U-bolts and the nuts and tighten it finger-tight. The Sway Bar Kit ends need to be moved into position and fitted to the links then fasten them, using bolt, washer, nut and tighten it to the required torque. Last but not, turn the retainer bolts and link nuts to the appropriate torque tightness.