How to remove and install a front Sway Bar Kit assembly on 1999 Ford Ranger?

Position the front wheels straight ahead and securely raise the vehicle on jackstands. Disconnect the Sway Bar Kit from the lower control arms by removing the nuts from the links that attach the bar to the arms, discarding the fasteners on later models as new ones will be used during installation. Detach the Sway Bar Kit from the frame by removing the four bracket bolts, also discarding fasteners on later models for new ones during installation. Remove the Sway Bar Kit assembly and inspect all rubber bushings for any cracks, tears, or damage, replacing any that are worn or deteriorated. Installation follows the reverse order of removal, ensuring that all bolts and nuts are tightened to the specified torque. Note that the sway bar-to-frame bracket bolts are self-tapping; if they cannot be tightened to the correct torque, obtain a kit with special fasteners from the dealer, and on later models, use new Sway Bar Kit link nuts and bracket bolts.

Genuine 1999 Ford Ranger Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Kits found

View related parts
1999 Ford Ranger Stabilizer Bar
Part Number: F87Z-5482-DA
$113.90 MSRP: $158.23
You Save: $44.33 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Stabilizer Bar
- Manufacturer Note: Stabilizer, 4x4,
- Base No.: 5482
- Item Weight: 22.10 Pounds
- Item Dimensions: 54.6 x 18.0 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-5482-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 1999 Ford Ranger Submodels:
- 4 Cyl 2.3L, 4 Cyl 2.3L NA Petrol, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L, 6 Cyl 4.0L SOHC EFI | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT, 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
1999 Ford Ranger Stabilizer Bar
Part Number: F87Z-5482-BA
Product Specifications
- Other Name: Bar - Stabilizer
- Manufacturer Note: Front Stabilzer, 4x2
- Replaced by: F87Z-5482-BD
- Item Weight: 12.90 Pounds
- Item Dimensions: 45.3 x 9.3 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-5482-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 1999 Ford Ranger Submodels:
- 4 Cyl 2.3L, 4 Cyl 2.3L NA Petrol, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L, 6 Cyl 4.0L SOHC EFI | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT, 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
1999 Ford Ranger Stabilizer Bar
Part Number: E9TZ-5A772-B
Product Specifications
- Other Name: Bar - Stabilizer
- Base No.: 5A772
- Item Weight: 5.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E9TZ-5A772-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 1999 Ford Ranger Submodels:
- 4 Cyl 2.3L, 4 Cyl 2.3L NA Petrol, 4 Cyl 2.5L, 6 Cyl 2.9L, 6 Cyl 3.0L, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L, 6 Cyl 4.0L SOHC EFI | 4AT 4R44E, 4AT 4R55E, 4AT A4LD, 5AT 5R44E, 5AT 5R55E, 5MT, 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

1999 Ford Ranger Sway Bar Kit

At FordPartsGiant.com, you will find an extensive inventory of genuine 1999 Ford Ranger Sway Bar Kit offered at competitive prices online. These manufacturer-backed OEM 1999 Ford Ranger Sway Bar Kit ensure your satisfaction with their quality and come with a hassle-free return policy and expedited delivery service, guaranteeing a delightful shopping experience.

1999 Ford Ranger Sway Bar Kit Parts Questions & Experts Answers

Q:
How to remove and install a front Sway Bar Kit assembly on 1999 Ford Ranger?
Posted by Ronzal W.
A:
Position the front wheels straight ahead and securely raise the vehicle on jackstands. Disconnect the Sway Bar Kit from the lower control arms by removing the nuts from the links that attach the bar to the arms, discarding the fasteners on later models as new ones will be used during installation. Detach the Sway Bar Kit from the frame by removing the four bracket bolts, also discarding fasteners on later models for new ones during installation. Remove the Sway Bar Kit assembly and inspect all rubber bushings for any cracks, tears, or damage, replacing any that are worn or deteriorated. Installation follows the reverse order of removal, ensuring that all bolts and nuts are tightened to the specified torque. Note that the sway bar-to-frame bracket bolts are self-tapping; if they cannot be tightened to the correct torque, obtain a kit with special fasteners from the dealer, and on later models, use new Sway Bar Kit link nuts and bracket bolts.
Answered by Ford Parts Specialist Patrick / Nov 13, 2024