Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Ford E69Z-6375-A Flywheel Assembly

1986-2008 Ford E69Z6375A

Customer Questions & Expert Answers (8)
E69Z-6375-A Ford Flywheel Assembly Product Photo 1 of 1
E69Z-6375-A Ford Flywheel Assembly Product Photo 1 of 1
E69Z-6375-A Ford Flywheel Assembly Illustration 1 of 1
  • Part Description
    Flywheel Assy
  • Base No.
    6375
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • Related Parts

    Shop for related parts for your vehicle

  • Product Specifications

    BrandGenuine Ford
    Base No.6375
    Manufacturer Part NumberE69Z-6375-A, E69Z6375A
    Part DescriptionFlywheel Assy
    Other NamesDrive Plate, Flywheel
    Manufacturer NoteA4LD A/T
    Item Dimensions3.3 x 14.2 x 13.3 inches
    Item Weight5.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUE69Z-6375-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1986-1997 Ford Aerostar4 Cyl 2.3L, 6 Cyl 3.0L4AT 4R44E, 4AT 4R55E, 4AT A4LD, 5AT 5R55E, 5MT
    1991-2008 Ford Ranger6 Cyl 3.0L, 6 Cyl 3.0L OHV EFI4AT 4R44E, 4AT 4R55E, 4AT A4LD, 5AT 5R44E, 5AT 5R55E, 5MT, 5-Speed Automatic Transmission - 5R44E/5R55E, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

  • Customer Questions & Expert Answers

    Q:
    I would like to know is this part gonna fit with my car Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if E69Z-6375-A fits your vehicle.
    Posted by FordPartsGiant Specialist
    Installation and Repair Tips
    Q:
    How do you prevent the Flywheel/driveplate from turning while tightening the bolts for the 1997 Ford Ranger? Posted by Customer
    A:
    Wedge a screwdriver through the starter motor opening to keep the flywheel/driveplate from turning as you tighten the bolts in a crisscross pattern, to the torque.
    Posted by FordPartsGiant Specialist
    Q:
    How can you keep the Flywheel/driveplate from turning while tightening the bolts for the 1994 Ford Ranger? Posted by Customer
    A:
    Wedge a screwdriver in the ring gear teeth to keep the flywheel/driveplate from turning and tighten the bolts, in the correct sequence, to the specified torque.
    Posted by FordPartsGiant Specialist
    Q:
    How can you prevent the Flywheel/driveplate from turning while loosening the bolts for the 2001 Ford Ranger? Posted by Customer
    A:
    Install one transmission mounting bolt into the cylinder block and have an assistant hold a prybar against the starter ring gear teeth and the mounting bolt like a lever.
    Posted by FordPartsGiant Specialist
    Q:
    What is recommended if there are signs of severe wear or damage on the Flywheel/driveplate for the 1998 Ford Ranger? Posted by Customer
    A:
    It is common to have the flywheel/driveplate resurfaced by a professional machine shop. Also, clutch replacement is recommended if the flywheel is resurfaced.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done if the Flywheel ring gear is badly worn or has teeth missing for the 1999 Ford Ranger? Posted by Customer
    A:
    If the flywheel ring gear is badly worn or has teeth missing, it should be replaced by an automotive machine shop.
    Posted by FordPartsGiant Specialist
    Q:
    What should I be cautious about when removing the Flywheel/driveplate for the 2001 Ford Ranger? Posted by Customer
    A:
    Remove the flywheel/driveplate from the crankshaft carefully, as it is fairly heavy. Be sure to support it while removing the last bolt. Note that automatic transmission equipped vehicles have a spacer between the crankshaft and the driveplate.
    Posted by FordPartsGiant Specialist
    Q:
    How should the Flywheel/driveplate be positioned for reinstallation for the 2003 Ford Ranger? Posted by Customer
    A:
    Position the flywheel/driveplate against the crankshaft, ensuring to align the marks made during removal. Note that some engines have an alignment dowel or staggered bolt holes to ensure correct installation. Before installing the bolts, apply thread locking compound to the threads.
    Posted by FordPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Ford Part E69Z-6375-A, the Right Choice

To ensure reliability, purchase part # E69Z-6375-A Flywheel Assembly. It is also called Flywheel. OEM parts are of high quality and known for their longevity. This is because they are built to the Ford standards which are relatively high and undergo rigorous quality control testing. This part fits specific Ford Aerostar, Ranger models.

FordPartsGiant.com is a leading supplier of genuine components and accessories such as E69Z6375A Flywheel Assembly. Looking to purchase quality low-cost OEM Ford parts? You have just found the right place. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly