Engine Parts - Internal - Lower fit your 1988 Ford Mustang 4 Cyl 2.3L 4-Speed Automatic Transmission A4LD

ALL MTX

F A4LD

ALL M/T

43/64" I.D. X 1 3/8" O.D.

CYL. BLOCK TO FLYWHEEL HSG.

16.84MM LONG X 15.34MM O.D.

16.51MM LONG X 12.72MM O.D.

CYL. BLOCK TO FLYWHEEL HSG.

CYL. BLOCK TO TRANSMISSION

BOLT (8501 & 6019 TO 6010 BLOCK) M8 X 105

(NN-124-E)-PIN (FRONT COVER TO BLOCK)-1/2" O.D.- 7/16" I.D. X 9/16" LONG-SPLIT DOWEL
(NN-124-E)-PIN (FRONT COVER TO BLOCK)-1/2" OD- 7/16" ID X 9/16" LONG-SPLIT DOWEL

(WW-135-C) Stud-(6019 to 6010)-5/16-18x3.09

Dowel pin - 6603 to 6019-Also refer to group 6397 , EFI

(AM-13-CA)-NUT (8501 & 6019 TO 6010 BLOCK) M8

(PP-4) - PLUG (HOLE IN FRONT COVER) - BUTTON

(WW-123-KK)-STUD (6019 & 8501 TO BLOCK)- 5/16"-18 X 3/8"-16 X 5.40" HEX.

(B-73-B) - bolt (cover to block)-5/16"-24 x 5"- hole No. 13

(WW-123-KL) STUD-(8501 &6019 TO 6010)-3/8-16-5/16-18X6.60

(WW-135-AN) STUD-(6019 TO 6010)-5/16-18X3.34

(BB-544-A) Bolt-(6019 to 6010)-5/16-18x .88

(B-319-W)-BOLT (COVER TO BLOCK)-HEX. WASHER HD.- 5/16"-18 X 2"
(B-319-W)-bolt (cover and timing pointer to block)-5/16"-18 x 2"-hex. hd.

(AB-53-A) BOLT (LWR CVR. TO 6010)-M6 X 20 (METRIC COARSE)

SCREW (6019 TO 6010 BLOCK) M8 X 20

INNER - PLASTIC CVR.

#E8DE-AA

(BB-551-DV)-BOLT 5/16-18X1.12 -OIL PAN TO BLOCK

ALL F -W/O LOW OIL SENSOR
ALL MX -T/C W/O LOW OIL SENSOR

ALL W/LOW OIL SENSOR , THIS TYPE OIL PAN REQUIRES ONE PIECE 6710 GASKET

ALL W/O LOW OIL SENSOR , THIS OIL PAN REQUIRES ONE PIECE 6710 GASKET

STANDARD RED - UPPER AND LOWER - W/OIL HOLE

.010" U/S

STD.-UPPER & LOWER

.010" U/S

.020" U/S

STD BLUE

STD.-UPPER & LOWER

.010" U/S

.020" U/S

Inner-Lower

ALL STD. O.D.-.010"U/S I.D. , UPR&LWR FRT,FRT.INTERM.& REAR-LOWER REAR INTERM., COMPLETE SERVICE ONLY KIT

Lower-.030 U/S-Center Brg.

ALL STD.O.D.-.010"U/S I.D. , UPPER REAR INTERMEDIATE

Standard Red - Upper & lower - all exc. center position

Standard Red - Upper - center

STANDARD RED - LOWER - CENTER

STANDARD BLUE - LOWER - CENTER

ALL STD. O.D.-STD. RED I.D. , UPR&LWR FRT,FRT.INTERM.& REAR-LOWER REAR INTERM.

ALL STD. O.D.-STD. RED I.D. , UPPER REAR INTERMEDIATE

STANDARD - UPPER - FRONT INTER., REAR INTER. & REAR

Standard - Lower positions

Standard - Upper - Center

STANDARD & .001 U/S - UPPER - FRONT

STANDARD BLUE - UPPER & LOWER - ALL EXC. CENTER POSITION, COMPLETE SERVICE KIT ONLY
STANDARD BLUE - UPPER - CENTER, COMPLETE SERVICE KIT ONLY

.020" U/S - LOWER - CENTER, SERVICE ONLY COMPLETE KIT
.020" U/S - UPPER & LOWER - ALL EXC. CENTER POSITION, SERVICE ONLY COMPLETE KIT
.020" U/S - UPPER - CENTER, SERVICE ONLY COMPLETE KIT

ALL STD. O.D.-.020"U/S I.D. , UPPER REAR INTERMEDIATE, COMPLETE SERVICE ONLY KIT
ALL STD. O.D.-.020"U/S I.D. , UPR&LWR FRT,FRT.INTERM.& REAR-LOWER REAR INTERM., COMPLETE SERVICE ONLY KIT

ALL STD. O.D.-.030"U/S I.D. , UPPER REAR INTERMEDIATE, COMPLETE SERVICE ONLY KIT
ALL STD. O.D.-.030"U/S I.D. , UPR&LWR FRT,FRT.INTERM.& REAR-LOWER REAR INTERM., COMPLETE SERVICE ONLY KIT

7/16" -20 X 3/4" -USE WITHOUT 6A366 PLATE

ALL M/T , M10 X 1 X 28.6

ALL M/T , M10 X 45 (METRIC)

ALL ATX , ATT. 6375 TO 6303

ALL MTX , ATT.6375 TO 6303

Steel cover

.030" O/S

STD. & .003" O/S

.020" O/S , H/O

ALL F EFI , STD. RED

ALL F EFI , STD. BLUE

.030" O/S, H/O

.040" O/S , H/O

Stud - Att. screen & cvr to brg. cap - 3/8" -16 7/16" x 14 - 4 3/32"

M12 - 1.75 X 80

Stud - M12 - M10 x 109

M8 x 1

ALL ``FROM 9/1/87"

DUAL TOOTH GEAR-USE ONLY W/ EOAZ-6268-A & E4AZ-6256-A DUAL TOOTH GEAR-FOR PRIOR TO 3/21/84 H/O ENG.S MUST ALSO USE DUAL TOOTH 6256 & DUAL LINK 6268-REPLS SINGLE TOOTH SPROCKETS & CHAIN. , H/O
DUAL TOOTH GEAR-USE ONLY W/ EOAZ-6268-A & E4AZ-6256-A DUAL TOOTH GEAR-MUST ALSO USE DUAL TOOTH 6256 & DUAL LINK 6268. , EXC H/O

ONE PIECE-ALSO REF. 6781 FOR 4 PIECE GSKT SET.

ALL ``FROM 5/5/87" , ONE PIECE DESIGN-"BEFORE 5/5/87" REF.6781 KIT.

.50MM/.020" U/S, COMPLETE KIT , ALL ``FROM 7/1/86"