My Garage
My Account
Cart
Genuine Ford Fusion Power Steering Pump
Power Steering Pump Unit- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Power Steering Pumps found
Ford Fusion Pump Assy - Power Steering
Part Number: AH6Z-3A696-A$93.70 MSRP: $152.80You Save: $59.10 (39%)Ships in 1-2 Business Days
Ford Fusion Pump Assy - Power Steering
Part Number: EU2Z-3V674-HRM$142.10 MSRP: $227.27You Save: $85.17 (38%)Ships in 1-3 Business DaysFord Fusion Pump Assy - Power Steering
Part Number: EU2Z-3V674-LRM$203.84 MSRP: $330.00You Save: $126.16 (39%)Ships in 1-2 Business Days
Ford Fusion Power Steering Pump
The Power Steering Pump is suitable in Ford Fusion automobiles since it is used in converting supply energy from the engine into hydraulic to enable easier steering. This pump works on the principle of establishing fluid pressure that help the driver in controlling the direction of the vehicle especially at slow movement or when still. Hydraulic and EPAS were used in Ford Fusion models over the years of the model's production and evolution. In hydraulic systems there is a hydraulic pump which is engine driven while in electric systems, there are motors. The primary difference to be found here is a subject of how electricity is delivered, where hydraulic ones will give a mechanical connection thru a series of hydraulic components and electric systems will prove to be flexible and efficient further. In general, the responsibilities of Power Steering Pump also underline the principal function as an important component to provide the comfortable ride in cars of brand Ford Fusion.
We provide a wide range of Ford Fusion Power Steering Pump at the best prices possible. If you need Ford Fusion Power Steering Pump, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Ford Fusion Power Steering Pump Parts Questions & Experts Answers
- Q: How to remove and install the power steering pump on Ford Fusion?A:To allow easy removal of the power steering pump, the cable from the negative terminal of the battery should be disconnected. Finally, with a large syringe or sucking gun, try to remove as much liquid as possible from the power steering fluid reserve and, to do this, you should disconnect the hoses and let the liquid flow into a drain pan. In models that you have with a fluid reservoir that is positioned at a distance from the block, it will be necessary to take it off. Then, remove the drivebelt, and then remove the electrical connector from the power steering pump, and finally, loosen the bolt of the power steering high pressure fluid line support bracket. The pressures and supplying hoses have to be disconnected and the mounting screws have to be loosened for removing the pump from the engine. For removal, for installation reverse these steps by instating new sealing washer on the high pressure line, tightening the mounting bolts and banjo bolt as per the torque, refilling the power steering reservoir with the recommended fluid and bleeding the hydraulic system.
