Ford E5FZ-7550-A Disc Assembly - Clutch

You can Select Your Vehicle to check if E5FZ-7550-A fits your vehicle.

To remove the engine/transaxle assembly from the vehicle, separate the engine from the transaxle by removing the bolts. Use a center punch to mark the position of the pressure plate assembly on the flywheel. Loosen the pressure plate bolts in a criss-cross pattern and remove the pressure plate and disc assembly from the flywheel. Inspect the friction surfaces of the disc assembly, pressure plate, and flywheel for signs of uneven contact, wear, or damage. Measure the distance from the rivet heads to the lining surface of the clutch plate to determine wear. Check for contamination by oil or grease and inspect the hub for cracks or damage. Remove and inspect the release bearing and release lever. Check the flatness of the pressure plate and look for signs of overheating or wear. Ensure the pressure plate fits snugly on the flywheel dowels. To install, position the disc assembly on the flywheel using an alignment tool. Place the pressure plate in position on the flywheel dowels, aligning it with the marked position. Tighten the bolts in a criss-cross pattern to the specified torque. Install the release lever and release bearing. Finally, attach the transaxle to the engine.