Fuel Lines & Related Parts fit your 1997 Ford E-350/E-350 Super Duty 10 Cyl 6.8L 4AT E4OD 10 Cyl 6.8L 4-Speed Automatic Transmission E4OD

Transfer pump. Attach to fuel/water/filter separator(9155). Attaching bolts-9R534., 7.3L DI Turbo, BEFORE 1/12/98

(AR-51) retainer, 3/8" tube push connect

(AE-110-EA) push connect, female straight, 3/8" x 5/16" connector asy., 9.5mm tube x 6.4mm hose; type 3

(AI-112-GA) push connect, female 3/8" x 5/16" 90 elbow asy., 9.5mm tube x 6.3mm hose; type 2

Spring lock coupling, female, sleeve - 6.35mm hose x 9.5mm push connect; type 8,

1/4" nylon tubing, 25 ft. roll

3/8" straight, push connector w/18" nylon tubing attached; type 3

(AI-110-DA) push connect, female straight 5/16" connector asy., 7.9mm tube x 6.3mm hole push connect; type 3

(AI-114-E) push connect, male 5/16", connector 8.0mm tube x 7.0mm hose, push connect; type 7

(AR-51-C) retainer, 6.35mm push connect (duck bill)

(AI-112-E) push connect, female 90 elbow, 5/16" asy., 7.94mm tube x 6.35mm hose

Spring lock coupling, female, sleeve - 6.35mm hose x 12.7mm push connect; type 8

(AI-114-C) spring lock coupling, male 3/8" connector body, 1/4" hose x 3/8" push connect; type 6

(AI-115-F) spring lock coupling, male 1/2", connector body 6.35mm hose x 12.7mm push-connect; type 6

3/8" 90 elbow, push connector w/18" nylon tubing attached; type 2

Located on frame rail with "9C968" fuel regulator. Element 9365, 5.4L NGV

GFI#A1-412. Coalesing filter assembly(housing/element). Element 9N184., 4.9L Bi-Fuel, GAS/NGV

Gas engines, RV prep; caps F7UZ 9S303-AB, Fuel tank aux. drain tube asy., (Stripped Chassis/Cutaway)

Rubber dust cap with loop end of tether to fit over fill valve 9C112. Will retrofit for all fill valves., NGV

Turn to "click" label; safety alert symbol-triangle., (Cutaway) unleaded fuel

1 port - Midship fuel tank, without Calif Ems.

"L" shaped; 34mm High x 35mm Wide x 14mm Thick.
"L" shaped; 34mm High x 35mm Wide x 14mm Thick. , (Stripped Chassis & Cutaway)

(Stripped Chassis/Cutaway) 7.3L, BEFORE 1/12/98
7.3L, BEFORE 1/12/98

Clip 12.5mm & clamp 18mm with tether. Attach fuel supply line to fuel rail., Gas

Mounts front fuel supply/return/vapor lines (9S273/9S274/9D676). Nylon clip 3 tube holder 52mm wide w/mtg stem., Gas

3 tube(fuel supply/return/vapor) holder clip w/mtg stem. Also serv in 9S296., Cutaway/Stripped Chassis-Gas

2-tube holder w/snap in plug to mount frt fuel supply/return lines 9S273/9S274., Diesel

Mounts frt fuel supply/return/vapor lines 9S273/9S274/9D676. Nylon clip 3 tube holder 58mm wide w/o mtg stem., Gas

3 tube clip 68mm wide w/mtg stud M6 x 1. Mounts 2 vapor & 1 brk lines in midship frame organizer., 138" W/B-with T/T or T/T prep pkg.

Also serviced in 9B324, 5.4L NGV

Gasket-high pressure oil injection pump 9A543, Diesel 7.3L

Cylindrical canister only, w/mid-ship fuel tank

Plug for pressure transducer "9C052"

3/4" I.D. x 21 7/8", Stripped Chassis/Cutaway, gas w/ aft axle tank
3/4" I.D. x 21 7/8", gas, w/o throw-away tank

1/2" wide gasket with 4 mounting tabs. Also serviced in 9275/9H307 fuel tank sender/pump & sender

Used with Aft Axle fuel tank. Mount between 9H307 & 9002, (Cutaway/Stripped Chassis)
Used with Aft Axle fuel tank. Mount between 9H307 & 9002. 6 inches diameter w/ 6 bolt holes, (Cutaway/Stripped Chassis)

138" W/B, exc. Cutaway

Includes attaching parts (2) N806588-S36 (AB-119-V) & mounting gasket F6DZ 9276-A., Gas, aft axle tank

VMV Valve

#F7UA 9058-AA; aft aux. tank support., 5.4L NGV, extended fuel

1/4" , 20 x 1" , incl. "O" ring seal , (Cutaway/Stripped Chassis) 138", 158", 176" W/B; 40 gallon aft tank

Complete fuel/water separator asy. has hole in lever for attaching cable to water drain., 7.3L, BEFORE 1/12/98

Use w/ 55 gal. aft axle tank, 7 1/4" x 12 7/8" "L' shaped brace , Stripped Chassis/Cutaway

Wire from MAF sensor on air cleaner

Aft axle tank., 7.3L

Midship tank., Regular/extended vans/wagons, 7.3L Diesel, BEFORE 11/25/2002

Aft axle tank, (Stripped Chassis/Cutaway) unleaded gas

Kit does not include metal fill pipe, use 9034 or body builders pipe , (Stripped Chassis/Cutaway) unleaded gas without throw away tank

(Cutaway) leaded/diesel, throw away tank

5.4L SOHC, 4.2L, 4.6L, 6.8L

(MM-108-D) - Nut - 1/2" - 20 - use w/91A 2269

(MM,105,F) , Nut , 1/2" , 20 , use w/8C 2269,B

Tubing - steel - 5/16" O.D. - supplied in 25 ft. rolls

Tubing , steel , 3/8" O.D. , supplied in 25 ft. rolls

Tubing , nylon , 1/4" O.D. , clear , 50 ft. rolls

Tubing , nylon , 3/8" O.D. , yellow , 50 ft. rolls

Tubing , nylon , 1/4" O.D. , green , 50 ft. rolls

Tubing , nylon , 1/2" O.D. , red , 50 ft. rolls

Tubing - nylon - 1/2" O.D. - green - 50 ft. rolls

Tubing , nylon , 3/8" O.D. , black , 50 ft. rolls

(AM-13-CE) - Nut - Fuel tank strap to frame - M12 x 1.75 hex flange lock, 5.4L NGV, midship tank

#F7UA 9056-AE; Lower strap, midship tank., 5.4L NGV, single midship tank, BEFORE 12/1/2003

#F7UA 9056-CF; Lower strap, midship tank., 5.4L NGV, dual midship tanks

(AU-56) Screw - M6.3 x 1.81 x 16mm Hex flange tap, 5.4L NGV

#F7UA 9071,AD; front , midship tank , 5.4L NGV

#F7UA 9071,BC; rear , midship tank , 5.4L NGV

#F7UA 9071-CA; located between 2 aft tanks., 5.4L NGV

Plastic, use with 5/16" outlet tube; also serviced in 9H307/9A407 asy.; 2 3/4" long, w/mechanical fuel pump

Plastic, use with 5/16" outlet tube; also serviced in 9H307/9A407 asy.; 1 1/2" long, w/mechanical fuel pump

Also serviced in tank fuel sender (9275), bottom pyamid sock, 7.3L

Hose (bulk) - 5/16" tube size - 25 ft. roll

Hose (bulk) , 3/16" tube size , 25 ft. roll

Hose (bulk) , 3/4" tube size , 25 ft. roll

Hose (bulk) , 5/8" tube size , 25 ft. roll

Hose (bulk) - 1/4" tube size - 25 ft. roll

#F7UA 9040-AB; use w/midship tank, 5.4L NGV

F7ub,14406,C* , w/138"W/B :includes fuel tubes,wire assy.,and organizer, BEFORE 3/98

17.45mm O.D. x 19mm long, vented plug for vapor valve, 7.3L DI Turbo

Filler neck mounting holes at 4, 7 & 11 o'clock , Cutaway/Stripped Chassis, gas/diesel

Connector - fuel vapor tube, 1/2" x 1/2", Gas
Connector - fuel vapor tube, 1/2" x 1/2", Gas, Stripped Chassis/Cutaway

#F7UA 9K014-DA; Steel, midship lower, frame mounted using (5) N620481-S301 nuts - M8 x 1.25 Hex flange (AM-18-AB), 5.4L NGV

Shield for dual aft aux. tank asy.; requires (4) N605906-S2 bolts (AB-122-DA) M8 x 1.25 x 28 hex for installation., 5.4L NGV, extended fuel

Upper rear portion of midship fuel tank, attaches to lip of tank., Midship, except NGV & Bi-Fuel

Vapor, return & supply lines from aft tank to lines on frame., (Cutaway/Stripped Chassis) gas, 35 gal. aft tank

Vapor, return & supply lines from aft tank to lines on frame., (Cutaway/Stripped Chassis) gas, 55 gal. aft tank

11/32" I.D. x 11/16" O.D. - 50 ft. roll

Pressure transducer, 5.4 L NGV

#F7UA 9B212-AB; rear shield - steel, frame mtd., 5.4L NGV

(Aft Axle) - 55 gal. Includes straps, mtg. bracket & heat shield. Has 3/4" dia. vent pipe, (Cutaway/Stripped Chassis), BEFORE 8/1/2002

Mounts "9155" filter, gas/gaseous, BEFORE 2/11/2000

(Cutaway/Stripped Chassis) 158" W/B

(Cutaway/Stripped Chassis) 176" W/B

138" W/B, single tank

Note: 9D319 bracket serviced in assembly only.

Cutaway/Stripped Chassis,158" WB

Cutaway/Stripped Chassis,176" WB

Reg/Ext Vans/Wagons,with T/T or T/T prep pkg

Component of F7UZ 9E498,AC, Vacuum vapor engine tube , Stripped Chassis & Commercial Cutaway.

Mounts to trans. Brkt w/3 tube holder for 9S273/9S274 front fuel supply/return/vapor lines.

Retains 1/2" single tube, gas
Retains 1/2" single tube, gas, Stripped Chassis/Cutaway

5 tube clip, retains vapor, return & supply lines of "9S296" asy. that runs from the aft to midship tanks , (Stripped Chassis/Cutaway)

EVAP service Port & tube asy. Contains vapor service port valve asy.

Jumper from canister to front vapor line; 28" long x 1/2" id., - (Stripped chassis/Cutaway) gas only
Jumper from canister to front vapor line; 28" long x 1/2" id., gas -extended Vans/Wagons
Jumper from canister to front vapor line; 28" long x 1/2" id., gas-regular Vans/Wagons, BEFORE 1/1/99

Midship - 3 Tube Ports. 4 wire pigtail. Mounting gasket F57U-9276-AC included in 9H307. Note: Before 12/3/96, exhaust stock of 9A407, then use 9H307., 5.4L, 6.8L, FROM 12/3/96

Aft Axle - 3 Tube Ports - 4 wire pigtail. Note: Before 11/5/96, exhaust 9A407 stock, then use 9H307. Mounting gasket F6DZ-9276-A., Cutaway/Stripped Chassis - 5.4L, 6.8L, FROM 11/5/96

Aft Axle - 3 Tube Ports - 4 wire pigtail. Note: Before 1/28/97, exhaust 9A407 stock, then use 9H307. Mouting gasket F6DZ-9276-A., Cutaway/Stripped Chassis - 4.2L, 4.6L, FROM 1/28/97

7.3L DI Turbo
7.3L DI turbo, Stripped Chassis/Cutaway

3 port in-tank fuel pump. Requires F2UA-9J274-GA connector for Aux Generator hook-up., Gas-Vans - RV Prep or H/D Service Pkg