How to disconnect the negative cable from the battery and remove the Turn Signal Switch assembly on Ford Ranger?

Disconnect the negative cable from the battery, and if equipped with an airbag, also disconnect the positive cable. For 2011 models, remove the key lock cylinder and, if applicable, the tilt lever handle. Take off the steering column lower cover and shrouds, ensuring to remove both the upper and lower steering column covers on 2011 models. Remove the two screws securing the Turn Signal Switch assembly to the steering column. Use a small screwdriver to release the tangs and pull the electrical connector(s) from the switch. After that, remove the Turn Signal Switch assembly. Installation follows the reverse order of removal, ensuring the horn harness grommet is positioned correctly and checking the steering column and switch for proper operation.

Genuine Ford Ranger Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Turn Signal Switches found

View related parts
Ford Ranger Direction Indicator Switch Assembly
Part Number: YL5Z-13K359-AAA
$83.71 MSRP: $138.36
You Save: $54.65 (40%)
ADD TO CART
Product Specifications
- Other Name: Switch Assy - Direction Indicator
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2003 Ford Ranger | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger Switch Assembly
Part Number: JX7Z-13341-A
$57.00 MSRP: $83.33
You Save: $26.33 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Signal Switch, Turn Signal Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 2 Whl L/H Rear Drive-High Ride, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
View related parts
Ford Ranger Switch Assembly
Part Number: JX7Z-13341-B
$57.00 MSRP: $83.33
You Save: $26.33 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Signal Switch, Turn Signal Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 2 Whl L/H Rear Drive-High Ride, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
View related parts
Ford Ranger Steering Column Housing Assembly
Part Number: KB3Z-3F791-AB
$271.20 MSRP: $400.00
You Save: $128.80 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: HOUSING ASY - STEERING COLUMN; Switch Housing
- Replaces: KB3Z-3F791-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 2 Whl L/H Rear Drive-High Ride, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
View related parts
Ford Ranger Steering Column Housing Assembly
Part Number: KB3Z-3F791-BB
$272.33 MSRP: $401.67
You Save: $129.34 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: HOUSING Assembly - STEERING COLUMN; Switch Housing
- Replaces: KB3Z-3F791-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 2 Whl L/H Rear Drive-High Ride, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
View related parts
Ford Ranger Steering Column Housing Assembly
Part Number: KB3Z-3F791-CB
$272.33 MSRP: $401.67
You Save: $129.34 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: HOUSING ASY - STEERING COLUMN; Switch Housing
- Replaces: KB3Z-3F791-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 2 Whl L/H Rear Drive-High Ride, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
View related parts
Ford Ranger Switch Assembly
Part Number: N1WZ-13341-C
$71.82 MSRP: $105.00
You Save: $33.18 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SWITCH ASY; Signal Switch, Turn Signal Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025 Ford Ranger | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Direction Indicator Switch Assembly
Part Number: 7L5Z-13K359-AA
Product Specifications
- Other Name: Switch Assembly - Direction Indicator; Combination Switch, Turn Signal Switch
- Replaces: 4L5Z-13K359-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2011 Ford Ranger | 4 Cyl 2.3L NA Petrol, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Ranger Direction Indicator Switch Assembly
Part Number: 4L5Z-13K359-AAB
Product Specifications
- Other Name: Switch Assy - Direction Indicator
- Manufacturer Note: Multi Function Switch
- Replaced by: 7L5Z-13K359-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2006 Ford Ranger | 4 Cyl 2.3L NA Petrol, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Ranger Switch - Dir. Indic/Warning Flasher
Part Number: F33Z-13341-B
Product Specifications
- Replaces: E7FZ-13341-A, E5FZ-13341-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1988 Ford Ranger | 4 Cyl 2.0L, 4 Cyl 2.3L, 6 Cyl 2.9L | 4AT A4LD, 5MT
View related parts
Ford Ranger Switch - Dir. Indic/Warning Flasher
Part Number: E5TZ-13341-AA
Product Specifications
- Other Name: Turn Signal & Hazard Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-1988 Ford Ranger | 4 Cyl 2.0L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 2.9L | 4AT A4LD, 5MT
View related parts
Ford Ranger Direction Indicator Switch Assembly
Part Number: F87Z-13K359-AA
Product Specifications
- Other Name: Switch Assy - Direction Indicator
- Replaced by: YL5Z-13K359-BAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998 Ford Ranger | 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT 4R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger Switch - Dir. Indic/Warning Flasher
Part Number: F2TZ-13341-B
Product Specifications
- Manufacturer Note: Includes intermittent windshield wiper switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1994 Ford Ranger | 4 Cyl 2.3L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT A4LD, 5MT
View related parts
Ford Ranger Switch - Dir. Indic
Part Number: F2TZ-13341-A
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1992 Ford Ranger | 4 Cyl 2.3L, 6 Cyl 2.9L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT A4LD, 5MT

Ford Ranger Turn Signal Switch

The Turn Signal Switch on a Ford Ranger enables the driver to signal lane changes or turns quickly so surrounding traffic can react in time. This lever that is fixed to the steering column sends an electrical signal to the outside indicator lamps as soon as it is flicked, causing them to blink. In the past, Ranger pickups had a straightforward Turn Signal Switch stalk just for the blinkers. Later on, Ford trucks got what is called a multi-function Turn Signal Switch. It also has controls for headlights, fog lamps, wipers, and cruise settings. This cut down clutter in the cockpit and gave drivers fingertip access to all their lighting needs. Both designs could offer the same level of safety, but the multi-function design also includes sliding dials and added contacts for handling added circuits, making it a comparatively bulkier unit but certainly more versatile. Regardless of its generation, ensuring the Turn Signal Switch responds is vital since a failed assembly can leave lamps silent, depriving other motorists of clear warnings. Thus, make sure to choose the right Ford Ranger Turn Signal Switch for every Ford Ranger year and trim.

We provide a wide range of Ford Ranger Turn Signal Switch at the optimal prices. If you need Ford Ranger Turn Signal Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Ford Ranger Turn Signal Switch Parts Questions & Experts Answers

Direction Indicator Switch Assembly
YL5Z-13K359-AAA
Q: How to disconnect the negative cable from the battery and remove the Turn Signal Switch assembly on Ford Ranger?
A:
Disconnect the negative cable from the battery, and if equipped with an airbag, also disconnect the positive cable. For 2011 models, remove the key lock cylinder and, if applicable, the tilt lever handle. Take off the steering column lower cover and shrouds, ensuring to remove both the upper and lower steering column covers on 2011 models. Remove the two screws securing the Turn Signal Switch assembly to the steering column. Use a small screwdriver to release the tangs and pull the electrical connector(s) from the switch. After that, remove the Turn Signal Switch assembly. Installation follows the reverse order of removal, ensuring the horn harness grommet is positioned correctly and checking the steering column and switch for proper operation.