How to remove and install the Oil Pressure Switch on 2000-2011 Ford Ranger?

To remove the switch, first, locate it screwed into the oil filter adapter at the oil filter. Ensure the vehicle is parked on firm, level ground, then open the hood and disconnect the negative battery cable. Raise the front of the vehicle and support it securely on jackstands. Unplug the wiring from the Oil Pressure Switch and unscrew it, being prepared for some oil loss. For installation, reverse the removal process while noting to apply a small amount of pipe sealant (Teflon type) to the switch threads and install it securely. After installation, check the engine oil level and top it off as necessary, then verify correct oil warning light operation and look for signs of oil leaks once the engine has been started and fully warmed up.

Genuine Ford Ranger Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Oil Pressure Switches found

View related parts
Ford Ranger Switch Assy - Oil Pressure
Part Number: D4AZ-9278-A
$44.90 MSRP: $72.73
You Save: $27.83 (39%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1983-1992 Ford Ranger | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 2.9L, 6 Cyl 3.0L, 6 Cyl 4.0L | 3AT C3, 3AT C5, 4AT A4LD, 4MT, 5MT
View related parts
Ford Ranger SENDER ASY - OIL PRESSURE
Part Number: GN1Z-9D290-C
$67.37 MSRP: $91.27
You Save: $23.90 (27%)
ADD TO CART
Product Specifications
- Replaced by: GN1Z-9D290-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019 Ford Ranger | 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 2 Whl L/H Rear Drive-High Ride, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
View related parts
Ford Ranger Switch Assy - Oil Pressure
Part Number: F75Z-9278-CB
$21.55 MSRP: $34.36
You Save: $12.81 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2001 Ford Ranger | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT
View related parts
Ford Ranger Sender Assy - Oil Pressure
Part Number: E4ZZ-9278-A
$21.43 MSRP: $34.18
You Save: $12.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pressure Sending Unit, Oil Pressure Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1983-1989 Ford Ranger | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 2.9L | 3AT C3, 3AT C5, 4AT A4LD, 4MT, 5MT
View related parts
Ford Ranger Switch Assy - Oil Pressure
Part Number: 6U5Z-9278-G
$24.62 MSRP: $39.27
You Save: $14.65 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: G1CZ-9278-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2011 Ford Ranger | 4 Cyl 2.3L NA Petrol | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Ranger Switch Assy - Oil Pressure
Part Number: 1U5Z-9278-GA
$24.62 MSRP: $39.27
You Save: $14.65 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: G1CZ-9278-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Ranger | 4 Cyl 2.3L, 4 Cyl 2.3L NA Petrol, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT, 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Ranger Switch Assy - Oil Pressure
Part Number: 6U5Z-9278-D
$20.71 MSRP: $32.18
You Save: $11.47 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: GC3Z-9278-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Ranger | 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Ranger Switch Assy - Oil Pressure
Part Number: 1U5Z-9278-DA
$20.18 MSRP: $32.18
You Save: $12.00 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: GC3Z-9278-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Ranger | 4 Cyl 2.3L, 6 Cyl 3.0L, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L, 6 Cyl 4.0L SOHC EFI | 5AT 5R44E, 5AT 5R55E, 5MT, 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Ranger Switch Assy - Oil Pressure
Part Number: E9SZ-9278-A
$11.68 MSRP: $18.91
You Save: $7.23 (39%)
ADD TO CART
Product Specifications
- Replaces: F4TZ-9278-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1998 Ford Ranger | 4 Cyl 2.0L, 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.9L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT 4R44E, 4AT 4R55E, 4AT A4LD, 5AT 5R55E, 5MT
View related parts
Ford Ranger SENDER ASY - OIL PRESSURE
Part Number: GN1Z-9D290-D
$64.31 MSRP: $91.27
You Save: $26.96 (30%)
ADD TO CART
Product Specifications
- Replaces: GN1Z-9D290-C, GN1Z-9D290-B, GN1Z-9D290-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | 4 Cyl 2.3 L GAS, 4 Cyl 2.3L TIVCT DI TC | 10-Speed Automatic Transmission (10R80), 2 Whl L/H Rear Drive-High Ride, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
View related parts
Ford Ranger Switch Assy - Oil Pressure
Part Number: E9TZ-9278-A
Product Specifications
- Other Name: Oil Pressure Sending Unit, Oil Pressure Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1998 Ford Ranger | 4 Cyl 2.0L, 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.9L, 6 Cyl 3.0L, 6 Cyl 4.0L | 4AT 4R44E, 4AT 4R55E, 4AT A4LD, 5AT 5R55E, 5MT

Ford Ranger Oil Pressure Switch

The Oil Pressure Switch explains various features found in Ford Ranger vehicles mainly working to maintain the health of an automobile engine through effective monitoring of oil pressure. Its main purpose is to inform the driver of low or high oil pressure contrary to the normal or desirable pressure required to sustain the motion and efficiency as well as the durability of a car's engine. There have been a number of different kinds of Oil Pressure Switches used on Ford Rangers throughout the years thus serving their functions well in measuring the oil pressure. While specific differences between these styles may not be detailed, the core mechanism remains consistent: pressure and their fluctuation and send out important signals to the vehicles working systems. This makes the Ford Ranger to run smoothly and also eliminate the possibility of the engine getting damaged due to low or high oil pressure.

We provide a wide range of Ford Ranger Oil Pressure Switch at the best prices possible. If you need Ford Ranger Oil Pressure Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Ranger Oil Pressure Switch Parts Questions & Experts Answers

Switch Assy - Oil Pressure
F75Z-9278-CB
Q: How to remove and install the Oil Pressure Switch on 2000-2011 Ford Ranger?
A:
To remove the switch, first, locate it screwed into the oil filter adapter at the oil filter. Ensure the vehicle is parked on firm, level ground, then open the hood and disconnect the negative battery cable. Raise the front of the vehicle and support it securely on jackstands. Unplug the wiring from the Oil Pressure Switch and unscrew it, being prepared for some oil loss. For installation, reverse the removal process while noting to apply a small amount of pipe sealant (Teflon type) to the switch threads and install it securely. After installation, check the engine oil level and top it off as necessary, then verify correct oil warning light operation and look for signs of oil leaks once the engine has been started and fully warmed up.

Related Ford Ranger Parts

Browse by Year