My Garage
My Account
Cart
Genuine Ford Fusion Hood Latch
Engine Hood Latch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Hood Latches found
Ford Fusion Latch Assembly - Hood
Part Number: DS7Z-16701-B$69.40 MSRP: $107.30You Save: $37.90 (36%)Ships in 1 Business Day
Ford Fusion Latch Assembly - Hood
Part Number: DS7Z-16701-A$69.40 MSRP: $107.30You Save: $37.90 (36%)Ships in 1 Business Day
Ford Fusion Latch Assembly - Hood
Part Number: AE5Z-16700-A$32.16 MSRP: $45.82You Save: $13.66 (30%)Ships in 1-2 Business Days
Ford Fusion Latch Assembly - Hood
Part Number: 6E5Z-16700-AA$28.17 MSRP: $41.18You Save: $13.01 (32%)Ships in 1-2 Business Days
Ford Fusion Latch Assembly - Hood
Part Number: DS7Z-16700-B$31.16 MSRP: $45.55You Save: $14.39 (32%)Ships in 1 Business Day
Ford Fusion Latch Assembly - Hood
Part Number: DS7Z-16700-A$31.16 MSRP: $45.55You Save: $14.39 (32%)Ships in 1 Business DayFord Fusion LATCH ASY - HOOD
Part Number: DS7Z-16700-C$31.16 MSRP: $45.55You Save: $14.39 (32%)Ships in 1 Business Day
Ford Fusion Latch Assembly - Hood
Part Number: HP5Z-16700-A$98.30 MSRP: $143.72You Save: $45.42 (32%)Ships in 1-2 Business Days
Ford Fusion Hood Latch
The Hood Latch in Ford Fusion cars is an important aspect with the duty of closing the hood, this is an essential to ensure the hood does not open during operation of the car. This mechanism is very important especially in protecting parts crucial such as the engine, radiator and battery. As for the Ford Fusion series, different kinds of Hood Latch have been Used in the course of the model's evolution, but the nature of the differences between these types is not explained. The primary goal remains consistent across all versions: to make sure that the hood of the car should not open while driving to increase safety measures and to protect the many systems inside the car. Hood Latch is one of the parts that make up the Ford Fusion and due to its importance in enhancing the reliability of the car, it merits an important place among the other parts.
We provide a wide range of Ford Fusion Hood Latch at the best prices possible. If you need Ford Fusion Hood Latch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Ford Fusion Hood Latch Parts Questions & Experts Answers
- Q: How do you remove and install the hood latch and release cable on Ford Fusion?A:To access the hood latch on 2011 and 2012 models, remove the upper radiator grille bolts and plastic rivets, while for 2013 and later models, the Bumper cover must be removed. Open the hood and mark a line around the latch for alignment during installation. Remove the retaining bolts securing the hood latch to the radiator support and take out the latch. Squeeze the cable retainer to release the cable from the latch assembly and disengage the cable end plug. For 2012 and earlier models, work in the engine compartment to remove the hood latch and disconnect the hood release cable, then detach the two release cable clips from the radiator grille opening panel reinforcement. Loosen the wheel lug nuts, raise the vehicle securely on jackstands, and remove the left front wheel along with the inner fender splash shield. Open the two release cable clips in the upper part of the fender opening and detach the release cable from the clips. Disengage the release cable clip from the wiring harness, remove the Smart Junction Box if applicable, and take out the two hood release handle mounting bolts to pull out the handle and disengage the release cable from it. For 2013 and later models, remove the front bumper cover and the cable junction block cover to the hood latch release cable, then detach the rear and right hood latch release cables, followed by the left hood release cable. Disconnect the cable stays and brackets for both left and right cables, press the retaining tabs inward to release the junction block, and remove the hood latch release lever from the driver's side kick panel. Take off the driver's side sill plate trim, instrument panel end trim cover, and pull the door weatherstrip off the A-pillar and driver's kick panel area. Remove the trim close-out panel between the A-pillar and instrument panel, then take out the driver's side kick panel and push the carpeting aside to access the hood release cable. Remove the bolts from the hood latch release and disconnect the rear hood release cable, detach any cable stays or brackets leading to the firewall, and pull the cable through the firewall and cowling area. If necessary, disconnect the cable from the hood latch release cable junction block, with installation being the reverse of removal.
