The A/C Accumulator in Ford Expedition automobiles contribute significantly in the efficiency of the air conditioning system. Sitting between the evaporator and the compressor, this cylinder shaped component provides a critical filtering service by removing moisture, oil and other debris from the cooling system. Consequently, the A/C Accumulator plays the function of protecting the compressor from possible harm and providing efficiency of the air conditioning. Even though the overview does not differentiate between various types or styles of A/C Accumulators used in different models of Expedition, the principle role does not change. The A/C Accumulator also serves to filter out contaminants and this makes its a important part of the cooling system of the Ford Expedition, especially for the vehicle's air conditioning system.
We provide a wide range of Ford Expedition A/C Accumulator at the optimal prices. If you need Ford Expedition A/C Accumulator, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.
Ford Expedition A/C Accumulator Parts Questions & Experts Answers
Q: How to replace the accumulator/drier in an air conditioning system on Ford Expedition?
A:
The accumulator/drier stores refrigerant and removes moisture in the air conditioning system. It should be replaced when a major component is changed or if exposed to air. To remove it, have the system discharged at a dealer or AC shop, disconnect the negative battery terminal, and disconnect the compressor clutch cycling switch. Disconnect the refrigerant lines, cap them, and remove the accumulator/drier. If replacing, drain the old refrigerant oil and add the same amount plus two ounces to the new one. Install the new accumulator/drier, reconnect the lines, and secure the clamp bolt. Reconnect the electrical connector and battery terminal. Finally, have a professional evacuate, recharge, and test the system.