How to replace a sealed beam or bulb-type Headlamp on Ford Crown Victoria?

In order to replace a sealed beam Headlamp, one has to first unscrew the cable from the negative terminal of the battery, before removing the screws from the Headlamp bezel. Sir next take of four screws of head light retainer but keep adjusting screws untouched then remove the retainer and pull the head light for removing the connector then take out the Headlamp completely. During installation the connector is connected, the position of the Headlamp is adjusted and placed in position then the retainer and screws tightened. Lastly, replace with the back bezel and tighten the screws that are used to hold it in position. For, a bulb-type Headlamp unscrew the headlamp and turn off the car and detach the cable from the negative terminal of the battery. If there is a cover, take it off and from behind Headlamp assembly get a grip of the bulb holder then rotate it clockwise to unlock it. If so, undo the electrical connector and unscrew the circular hook anticlockwise and pull the bulb holder out. sharing the clip to unsolder the bulb holder from the connector without touching the surface of a new bulb: if it is touched, wipe it with the rubbing alcohol. Place the new bulb into the connector until it comes to click, then place the bulb holder back into the head-lights.

Genuine Ford Crown Victoria Headlamp

Headlight

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Headlamps found

View related parts
Ford Crown Victoria Composite Headlamp
Part Number: F2AZ-13008-A
$114.61 MSRP: $156.60
You Save: $41.99 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp Assembly; Composite Headlamp
- Manufacturer Note: R.H.,
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1997 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Composite Headlamp
Part Number: 4W7Z-13008-B
$55.79 MSRP: $84.53
You Save: $28.74 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly; Composite Headlamp, Headlamp Assembly
- Position: Passenger Side
- Replaces: 5W7Z-13008-AA, 6W7Z-13008-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R70W, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Lamp Assembly
Part Number: 6W7Z-13008-AA
$55.79 MSRP: $84.53
You Save: $28.74 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: R.H., Lens and body only- does not include bulbs, sockets, or harness
- Position: Passenger Side
- Replaced by: 4W7Z-13008-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Lamp Assembly
Part Number: 5W7Z-13008-AA
$55.79 MSRP: $84.53
You Save: $28.74 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: R.H., Lens & housing only- does not include bulbs, sockets, or harness
- Position: Passenger Side
- Replaced by: 4W7Z-13008-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Crown Victoria | 8 Cyl 4.6L | 4AT
View related parts
Ford Crown Victoria Composite Headlamp
Part Number: 4W7Z-13008-A
$51.54 MSRP: $74.05
You Save: $22.51 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly; Composite Headlamp, Headlamp Assembly
- Position: Driver Side
- Replaces: 5W7Z-13008-BA, 6W7Z-13008-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R70W, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Lamp Assembly
Part Number: 6W7Z-13008-BA
$51.54 MSRP: $74.05
You Save: $22.51 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Manufacturer Note: L.H., Lens and body only- does not include bulbs, sockets, or harness
- Position: Driver Side
- Replaced by: 4W7Z-13008-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Lamp Assembly
Part Number: 5W7Z-13008-BA
$51.54 MSRP: $74.05
You Save: $22.51 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Manufacturer Note: L.H., Lens & housing only- does not include bulbs, sockets, or harness
- Position: Driver Side
- Replaced by: 4W7Z-13008-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Crown Victoria | 8 Cyl 4.6L | 4AT
View related parts
Ford Crown Victoria Lamp Assembly
Part Number: 4W7Z-13008-ACP
$67.41 MSRP: $92.10
You Save: $24.69 (27%)
ADD TO CART
Product Specifications
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
- 2004 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Headlamp Assembly
Part Number: F2AZ-13008-B
Product Specifications
- Other Name: Headlamp Assy; Composite Headlamp
- Manufacturer Note: L.H.,
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1997 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Lamp Assembly
Part Number: 4W7Z-13008-BCP
Product Specifications
- Other Name: Headlamp Assy
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
- 2004 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Lamp Assembly
Part Number: F2AZ13007B
Product Specifications
- Other Name: Lamp Assy; Lens & Housing
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Lamp Assembly
Part Number: F2AZ13007A
Product Specifications
- Other Name: Lamp Assy; Lens & Housing
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD, 4AT AOD-E

Ford Crown Victoria Headlamp

We provide a wide range of Ford Crown Victoria Headlamp at the optimal prices. If you need Ford Crown Victoria Headlamp, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Ford Crown Victoria Headlamp Parts Questions & Experts Answers

Composite Headlamp
F2AZ-13008-A
Q:
How to replace a sealed beam or bulb-type Headlamp on Ford Crown Victoria?
Posted by Greta D.
A:
In order to replace a sealed beam Headlamp, one has to first unscrew the cable from the negative terminal of the battery, before removing the screws from the Headlamp bezel. Sir next take of four screws of head light retainer but keep adjusting screws untouched then remove the retainer and pull the head light for removing the connector then take out the Headlamp completely. During installation the connector is connected, the position of the Headlamp is adjusted and placed in position then the retainer and screws tightened. Lastly, replace with the back bezel and tighten the screws that are used to hold it in position. For, a bulb-type Headlamp unscrew the headlamp and turn off the car and detach the cable from the negative terminal of the battery. If there is a cover, take it off and from behind Headlamp assembly get a grip of the bulb holder then rotate it clockwise to unlock it. If so, undo the electrical connector and unscrew the circular hook anticlockwise and pull the bulb holder out. sharing the clip to unsolder the bulb holder from the connector without touching the surface of a new bulb: if it is touched, wipe it with the rubbing alcohol. Place the new bulb into the connector until it comes to click, then place the bulb holder back into the head-lights.
Answered by Ford Parts Specialist Don / Apr 26, 2026

Related Ford Crown Victoria Parts

Browse by Year

2011 Headlamp 2010 Headlamp 2009 Headlamp 2008 Headlamp 2007 Headlamp 2006 Headlamp 2005 Headlamp 2004 Headlamp 1997 Headlamp 1996 Headlamp 1995 Headlamp 1994 Headlamp 1993 Headlamp 1992 Headlamp