Make sure this part fits

Ford AL1Z-3A427-B Front Axle Shaft

2007-2014 Ford AL1Z3A427B

Customer Questions & Expert Answers (5)
AL1Z-3A427-B Ford Front Axle Shaft Product Photo 1 of 9
  • Part Description
    Shaft - Front Axle
  • Base No.
    3B436A
  • Position
    Driver Side
  • Replaces
    7L1Z-3B437-A, AL1Z-3A427-A, TX-474, TX-577
  • Manufacturer
    Ford
Make sure this part fits
$158.07 MSRP: $303.64
You Save: $145.57 (48%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Ford
    Base No.3B436A
    Manufacturer Part NumberAL1Z-3A427-B, AL1Z3A427B
    Part DescriptionShaft - Front Axle
    Other NamesAxle Assembly
    Item Dimensions32.6 x 6.1 x 6.3 inches
    Item Weight20.40 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces7L1Z-3B437-A, AL1Z-3A427-A, TX-474, TX-577
    ManufacturerFord
    SKUAL1Z-3A427-B
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2010 Ford Expedition8 Cyl 5.4L4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 4AT 4R75W, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
    2009-2014 Ford F-1506 Cyl 3.5L DOHC TIVCT, 6 Cyl 3.7L PFI NA, 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.0L MOD DOHC SEFI NA, 8 Cyl 5.4L, 8 Cyl 6.2L OHC NA4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 5-Speed Manual Transmission - Mazda M5R2-C, 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
    2010-2014 Lincoln Mark LT6 Cyl 3.5L DOHC TIVCT, 6 Cyl 3.7L PFI NA, 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.0L MOD DOHC SEFI NA, 8 Cyl 5.4L, 8 Cyl 6.2L OHC NA4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 5-Speed Manual Transmission - Mazda M5R2-C, 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
    2007-2010 Lincoln Navigator8 Cyl 5.4L4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive
  • Customer Questions & Expert Answers

    Q:
    Will these fit my car and if not which part will? Thank you. Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if AL1Z-3A427-B fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How to remove and install the front axle shaft on Ford F-150? Posted by Customer
    A:
    Loosen lug nuts, raise vehicle on jackstands, remove wheel. Remove dust cap from hub. Remove Axle Shaft/hub nut and discard. Disconnect vent and vacuum lines from integrated wheel end. Remove fasteners securing integrated wheel end to steering knuckle. Separate upper control arm and tie-rod end from steering knuckle. Swing knuckle/hub assembly out until Axle Shaft is free. Support Axle Shaft with wire. Remove integrated wheel end from Axle Shaft. Mark CV joint to flange relationship, remove Axle Shaft flange bolts. Remove Axle Shaft from vehicle. Compress integrated wheel end, place caps on ports. Install integrated wheel end on Axle Shaft. Reverse removal steps. Use new nuts and bolts. Tighten to torque. Connect vent and vacuum lines. Install wheel, lower vehicle, tighten lug nuts.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done after refilling the axle with lubricant for the 2010 Ford F-150? Posted by Customer
    A:
    The wheel lug nuts should be tightened to the torque.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What torque should the caliper mounting bolts be tightened to for the 2012 Ford F-150? Posted by Customer
    A:
    Tighten the caliper mounting bolts to the specified torque.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after removing the mounting bolts for the 2012 Ford F-150? Posted by Customer
    A:
    After removing the mounting bolts, the axle assembly should be lowered and removed from under the vehicle.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part AL1Z-3A427-B, the Right Choice

To ensure reliability, purchase part # AL1Z-3A427-B Front Axle Shaft. It is also called Axle Shaft. OEM parts are of high quality and known for their longevity. This is because they are built to the Ford standards which are relatively high and undergo rigorous quality control testing. This part fits specific Ford Expedition, F-150 models. It fits Lincoln Mark LT, Navigator.

FordPartsGiant.com is a leading supplier of genuine components and accessories such as AL1Z3A427B Front Axle Shaft. Looking to purchase quality low-cost OEM Ford parts? You have just found the right place. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly