Ford G2MZ-2V026-ADA Brake Rotor Assembly

The manufacturer recommends resurfacing the brake discs only in the event of pedal pulsations or hard (overheated) spots on the disc. If you choose not to have the discs resurfaced, you should deglaze them with sandpaper or emery cloth. However, ensure that the disc thickness doesn't go below the specified minimum thickness, which is cast into the disc. You can check the disc thickness with a micrometer.

During the disc inspection, remove the brake calipers (without disconnecting the brake hoses) and hang them out of the way. For front discs on a 2WD model, you should remove the grease cap, wheel bearing retainer nut, spindle nut, outer bearing retainer washer, and outer wheel bearing, then remove the disc/hub.