Ford F8VZ-54632A23-AA Seat Cushion Pad

Remove the seat track retaining bolts/nuts, disconnect any electrical connectors and lift the seat and track assembly from the vehicle. Installation is the reverse of removal. Apply knee pressure to the lower portion of the seat cushion and push toward the rear of the vehicle to disengage the cushion from the brackets, then remove the seat cushion. If equipped, remove the rear armrests. Remove the lower seat back bolts and the outer seat belt bolts. Grasp the seat back securely at the bottom, lift up to disengage the hanger wire from the bracket, then remove the seat from the vehicle. Lower the seat back into position so the hanger wires engage in the brackets then install the seat belts and bolts. Place the seat cushion in position, then push it down and back with your knee until it locks in place. Install the rear quarter armrests and any other components that were removed.