Take out the passenger seat only of the Ranger, and then take out the four screws holding down the seat track to the floor pan; there are two on each side. Then remove the seat and track assembly from the truck. To remove the seat tracks from the seat cushion, turn it upside down on a clean bench. Remove the latch tie rod assembly and assist spring from the tracks and remove four screws connecting the track to the seat cushion (two each side). Remove the tracks from the seat cushion. To install the tracks place on seat cushion and install the four screws, tighten screws. Reattach the latch tie rod assembly and assist spring to the tracks and reinstall the seat and track assembly in the vehicle. Finally, Install four screws to attach the track to the floor pan. Tighten the screws to specification. Reinstall seat track insulators for Ranger passenger seat only.