Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Ford 6S4Z-6049-BA Cylinder Head Assembly

2003-2008 Ford 6S4Z6049BA

Customer Questions & Expert Answers (11)
Ford 6S4Z-6049-BA Cylinder Head Assembly
Ford 6S4Z-6049-BA Cylinder Head Assembly
  • Part Description
    Cylinder Head Assy
  • Base No.
    6049
  • Replaces
    3S4Z-6049-AA
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • Related Parts

    Shop for related parts for your vehicle

  • Product Specifications

    BrandGenuine Ford
    Base No.6049
    Manufacturer Part Number6S4Z-6049-BA, 6S4Z6049BA
    Part DescriptionCylinder Head Assy
    Other NamesCylinder Head
    Manufacturer NoteLess Valves
    Item Weight37.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces3S4Z-6049-AA
    ManufacturerFord
    SKU6S4Z-6049-BA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2008 Ford Escape4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
    2003-2007 Ford Focus4 Cyl 2.3L4-Speed Automatic Transaxle - 4F27E, 4AT 4F27E, 5-Speed Manual Transmission - B5/IB5, 5-Speed Manual Transmission - MTX75, 5MT, 6-Speed Manual Transmission, 6MT, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
    2005-2008 Mercury Mariner4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)

  • Customer Questions & Expert Answers

    Q:
    Can you tell me if this part is correct for my car? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 6S4Z-6049-BA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What is the procedure for the alternator assembly for the 2003 Ford Focus? Posted by Customer
    A:
    Slacken and remove the upper retaining bolt from the alternator assembly and disconnect the ground lead from the cylinder head above the alternator assembly.
    Posted by FordPartsGiant Specialist
    Q:
    What should you do if the valve binds in the guide for the 2004 Ford Focus? Posted by Customer
    A:
    Push it back in and de-burr the area around the groove with a fine file or whetstone, taking care not to mark the cam follower bores.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done after all bolts have been tightened for the 2001 Ford Escape? Posted by Customer
    A:
    No subsequent tightening is necessary.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be done during the inspection of the cylinder head for the 2011 Ford Focus? Posted by Customer
    A:
    1. Inspect the head very carefully for cracks, evidence of coolant leakage, and other damage. If cracks are found, a new cylinder head should be obtained. 2. If warpage of the cylinder head gasket surface is suspected, use a straight-edge to check it for distortion. If feeler gauges are used, the degree of distortion can be assessed more accurately. 3. Examine the valve seats in each of the combustion chambers. If they are severely pitted, cracked, or burned, they will need to be replaced or re-cut by an engine overhaul specialist. 4. If the valve guides are worn, indicated by a side-to-side motion of the valve, new guides must be installed. 5. The replacement of valve guides is best carried out by an engine overhaul specialist. 6. If the valve seats are to be re-cut, this must be done only after the guides have been replaced.
    Posted by FordPartsGiant Specialist
    Q:
    How do you compress the valve spring and install the keepers for the 2011 Ford Focus? Posted by Customer
    A:
    Compress the spring with a valve spring compressor and carefully install the keepers in the stem groove. If necessary, apply a small dab of grease to each keeper to hold it in place. Grease can also help stick each half of the keepers to a screwdriver or similar tool for installation. Slowly release the compressor and ensure the keepers seat properly.
    Posted by FordPartsGiant Specialist
    Q:
    What is the first step in the installation process for the 2006 Ford Focus? Posted by Customer
    A:
    Place a new head gasket on the cylinder block and then locate the cylinder head on the dowels.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should I do if the cylinder head sticks to the block for the 2005 Mercury Mariner? Posted by Customer
    A:
    If the cylinder head sticks to the block, pry only on a casting protrusion to prevent damaging the mating surfaces. Remove and discard the cylinder head gasket.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done after all bolts have been tightened for the 2008 Mercury Mariner? Posted by Customer
    A:
    No subsequent tightening is necessary.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What is recommended for installing the cylinder head for the 2005 Ford Focus? Posted by Customer
    A:
    Use guide studs to help align the cylinder head during installation, ensuring that it is located on the dowels.
    Posted by FordPartsGiant Specialist
    Q:
    What should I do if the cylinder head sticks to the block for the 2010 Ford Escape? Posted by Customer
    A:
    If the cylinder head sticks to the block, pry only on a casting protrusion to prevent damaging the mating surfaces. Remove and discard the cylinder head gasket.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 6S4Z-6049-BA, the Right Choice

To ensure reliability, purchase part # 6S4Z-6049-BA Cylinder Head Assembly. It is also called Cylinder Head. OEM parts are of high quality and known for their longevity. This is because they are built to the Ford standards which are relatively high and undergo rigorous quality control testing. This part fits specific Ford Escape, Focus models. It fits Mercury Mariner.

FordPartsGiant.com is a leading supplier of genuine components and accessories such as 6S4Z6049BA Cylinder Head Assembly. Looking to purchase quality low-cost OEM Ford parts? You have just found the right place. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly