Ford 9L3Z-7000-N Automatic Transmission Assembly

Troubleshooting must be performed with the transmission installed in the vehicle to ensure accurate diagnosis and assessment of the fault.

Prior to installation, make sure the torque converter is securely engaged in the pump. If you've removed the converter, apply a small amount of transmission fluid on the torque converter rear hub, where the transmission front seal rides. Install the torque converter onto the front input shaft of the transmission while rotating the converter back and forth. It should engage into the transmission front pump in stages. To make sure the converter is fully engaged, lay a straightedge across the transmission-to-engine mating surface and make sure the converter lugs are at least 3/4-inch below the straightedge.