My Garage
My Account
Cart
Engine Supports - (Front And Rear) Valves, Push Rods And Related Parts fit your 1988 Ford Ranger 6 Cyl 2.9L 5-Speed Manual Transmission
Currently shopping for
1988 Ford Ranger
Change VehicleVehicle Options
6 Cyl 2.9L; 5-Speed Manual TransmissionVehicle Options
6 Cyl 2.9L; 5-Speed Manual TransmissionCategories Close X
Currently selected
Engine
- Camshaft Gear And Bearings
- Crankshaft And Related Parts
- Cylinder Block & Plugs
- Cylinder Block And Related Parts
- Cylinder Head, Valves And Related Parts
- Engine Supports - (Front And Rear)
- Engine Supports - (Front And Rear) Gaskets
- Engine Supports - (Front And Rear) Oil Filter And Related Parts
- Engine Supports - (Front And Rear) Oil Pump And Related Parts
- Engine Supports - (Front And Rear) Piston And Connecting Rod
- Engine Supports - (Front And Rear) Timing Gear Cover And Related Parts
- Engine Supports - (Front And Rear) Valves, Push Rods And Related Parts
Other Categories
Accelerator Linkage, Air Cleaner & Speed Control
Air Conditioner, Radio & Shock Absorbers
Alternator, Battery, Distributor & Starter
BODY Body
EM Exterior Moulding
Fenders & Hood
Frame, Exhaust System & Springs
Front Axle & Steering
Fuel System & Manifolds
Lamps & Wiring
Manual Transmission
Radiator & Grill
Rear Axle, Drive & Coupling Shafts
Speedometer, Bumpers, Mirrors & Wipers
Wheels & Brakes
How to use OE catalog
Sort by:
Recommended
Part No. & Part Description
Price & Qty.
Part No. &
Part Description
Part Description
- SPROCKET (CAMSHAFT)
-E804514-S76
Screw- (AU-75-N) Screw (cam sprocket to camshaft) M10 x 1 x 33 , STANDARD PART
- Callout Name: 6256
- Replaced By: E7RY-6279-A
- -43002-S
Bolt 3/8-16 X 1.50- (B-257)-Bolt(sprocket to cam)-3/8"-16 x 1 1/2" , STANDARD PART
- Callout Name: 6256
- SPROCKET (CRANKSHAFT)
-375055-GS
Key - Crankshaft And Camshaft- Key (pulley to crankshaft)-woodruff
- Base Number: 375055-GS
- Callout Name: 6306
$5.33 $3.123
$8.10 $4.744
- PLATE (CAMSHAFT THRUST)
$80.67 $52.271 
D4ZZ-6A340-A
BOLT (CRANKSHAFT PULLEY)Bolt - Hex.Head- M12 x 1.5 x 75 (metric fine) r/b E7RY 6A340-B
- Callout Name: 6A340
- Replaced By: E7RY-6A340-B
$5.08 $3.574
- TAPPET ASSY. (VALVE)
D9HZ-6500-A
Valve Tappet- Hydraulic
- Require Quantity: 12
- Package Quantity: 8
- Callout Name: 6500
- Replaced By: F1DZ-6500-A
$9.48 $6.108 - D6FZ-6500-A
Valve Tappet- STD.
- Require Quantity: 8
- Package Quantity: 1
- Callout Name: 6500
- Replaced By: F67Z-6500-AA
- ARM (VALVE ROCKER)
E43Z-6564-A
Arm Assy - Valve Rocker- Require Quantity: 12
- Package Quantity: 1
- Base Number: 6564
- Callout Name: 6564
$18.75 $13.731 - D8AZ-6564-B
Arm Assy - Valve Rocker- Stamped steel type
- Require Quantity: 16
- Package Quantity: 1
- Callout Name: 6564
D8FZ-6564-A
Arm Assy - Valve Rocker- exc. roller cam eng.
- Require Quantity: 8
- Package Quantity: 1
- Base Number: 6564
- Callout Name: 6564
-E600112-S
TENSIONER ASSY. (TIMING)Screw- (AB-26-B) Screw (tensioner to block)-M6 x 35 , STANDARD PART
- Base Number: E600112-S
- Callout Name: 6K254
-E804358-S76
GUIDE (CRANKSHAFT TIMING CHAIN)Screw- (AB-45) Screw (timing chain guide to block) M6 x 35 rail torx , STANDARD PART
- Require Quantity: 2
- Package Quantity: 1
- Callout Name: 6K297
- BEARING (CAMSHAFT FRONT)
C2OZ-6267-A
BEARING (CAMSHAFT FRONT INTERMEDIATE)Bearing - Camshaft- STANDARD
Std. I.D. & O.D. - Callout Name: 6267
- STANDARD
C2OZ-6270-A
BEARING (CAMSHAFT REAR INTERMEDIATE)Bearing - Camshaft- STANDARD
Std. I.D. & O.D. - Callout Name: 6270
- STANDARD
C2OZ-6278-A
WASHER (CAMSHAFT SPROCKET)Washer- 13/32" I.D. x 1 3/16" O.D. x 7/32" thick r/b F3SZ-A
r/b F3SZ 6278-A 13/32" I.D. x 1 3/16" O.D. x 7/32" thick - Callout Name: 6278
- Replaced By: F3SZ-6278-A
- ROD (VALVE PUSH)
D2RY-6587-A
SPRING (VALVE ROCKER ARM TO SHAFT LOCATING)Spring - Rocker Arm Shaft- Require Quantity: 4
- Package Quantity: 1
- Base Number: 6587
- Callout Name: 6587
- BOLT (VALVE ROCKER ARM SUPPORT)
D3AZ-6A527-A
Screw- 5/16"-18 x 1 3/8"
- Require Quantity: 16
- Package Quantity: 1
- Base Number: 6A527
- Callout Name: 6A527
D8AZ-6A527-A
Screw- 5/16" -18 x 1 3/8"-bolt, use with stamped steel rocker arm
5/16"-18 x 1.40" - Require Quantity: 12
- Package Quantity: 1
- Base Number: 6A527
- Callout Name: 6A527
D4FZ-6K254-A
TENSIONER ASSY. (TIMING BELT)Tensioner - Timing Belt- Callout Name: 6K254
- Replaced By: F57Z-6K254-A
E53Z-6A528-A
SEAT (VALVE ROCKER ARM)Seat - Valve Rocker Arm Fulcrum- Require Quantity: 16
- Package Quantity: 1
- Base Number: 6A528
- Callout Name: 6A528
- BEARING (CAMSHAFT FRONT)
- E7RY-6549-A
SCREW (VALVE ROCKER ARM ADJUSTING)Screw - Adjusting- Require Quantity: 12
- Package Quantity: 1
- Callout Name: 6549
Genuine Ford Parts, the Right Choice
FordPartsGiant.com offers the wholesale prices for genuine 1988 Ford Ranger parts. Parts like Engine Supports - (Front And Rear) Valves, Push Rods And Related Parts are shipped directly from authorized Ford dealers and backed by the manufacturer's warranty. Parts fit for the following vehicle options. Engine: 6 Cyl 2.9L. Transmission: 5MT.