How to remove and install the switch on Mercury Mariner?

To remove the switch on 2006 and earlier models, start by disconnecting the wiring from the switch and rotating it clockwise. Then, turn the knob counterclockwise until it stops, start the engine, depress the brake pedal, and place the switch into its bracket. Finally, connect the wiring to the switch.

Genuine Mercury Mariner Brake Light Switch

Brake Lamp Switch

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

4 Brake Light Switches found

View related parts
Mercury Mariner Switch Assembly - Stop Light
Part Number: 8T4Z-13480-A
- Other Name: Switch Assy - Stop Light
- Replaced by: GL3Z-13480-A
$35.58 MSRP: $57.64
You Save: $22.06 (39%)

Add to Cart
More Info
Fits the following Vehicles:
2009-2011 Mercury Mariner | 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L PFI Gas/Electric, 6 Cyl 3.0L OHC Duratec | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
Less Info
View related parts
Mercury Mariner Switch Assembly - Stop Light
Part Number: YL8Z-13480-AA
- Other Name: Switch Assy - Stop Light; Stoplamp Switch
$15.96 MSRP: $25.45
You Save: $9.49 (38%)

Add to Cart
More Info
Fits the following Vehicles:
2005-2006 Mercury Mariner | 4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC, 6 Cyl 3.0L DOHC EFI Modular | 4AT CD4E, 5-Speed Manual Transmission, 5-Speed Manual Transmission - AK, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Right Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive), Two-Wheel Drive (Right Hand Drive)
Less Info
View related parts
Mercury Mariner Switch Assembly - Stop Light
Part Number: 3M5Z-13480-AB
- Other Name: Switch Assy - Stop Light; Stoplamp Switch
- Replaces: 3M5Z-13480-AA
$24.17 MSRP: $38.55
You Save: $14.38 (38%)

Add to Cart
More Info
Fits the following Vehicles:
2007-2008 Mercury Mariner | 4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC, 6 Cyl 3.0L DOHC EFI Modular | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
Less Info
View related parts
Mercury Mariner Switch Assembly - Stop Light
Part Number: 3M5Z-13480-AA
- Other Name: Switch Assy - Stop Light
- Replaced by: 3M5Z-13480-AB
$24.17 MSRP: $38.55
You Save: $14.38 (38%)

Add to Cart
More Info
Fits the following Vehicles:
2007 Mercury Mariner | 4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC, 6 Cyl 3.0L DOHC EFI Modular | 4AT CD4E, 5-Speed Manual Transmission - AK, 6-Speed Automatic Transmission 6F Mid-Range, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
Less Info

Mercury Mariner Brake Light Switch Parts Questions & Answers

Switch Assembly - Stop Light
YL8Z-13480-AA
Q: How to remove and install the switch on Mercury Mariner?
A: To remove the switch on 2006 and earlier models, start by disconnecting the wiring from the switch and rotating it clockwise. Then, turn the knob counterclockwise until it stops, start the engine, depress the brake pedal, and place the switch into its bracket. Finally, connect the wiring to the switch.