Q: How to remove and install an air cleaner housing assembly?
A: Disconnect the battery's negative terminal. Detach the fresh air inlet tube and all necessary vacuum hoses, lines, and electrical connectors from the air filter box. Remove the wing nut, grommet, cover, and filter element. Lift off the filter box assembly. For EFI, SEFI, and V8 models: Disconnect the battery's negative terminal and the air outlet tube. Unclip and remove the upper half of the filter box assembly and filter element. Detach the assembly. To remove or replace the resonator, remove the mounting nuts and detach it. For four-cylinder engines: Disconnect the battery's negative terminal. Remove the wing nut, cover, and filter element. Remove the filter box assembly mounting screws and the air cleaner outlet tube. Remove the filter box assembly. Installation is the reverse of removal for all models.