My Garage
My Account
Cart
Genuine Ford Ranger Accelerator Cable
Choke Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
13 Accelerator Cables found
Ford Ranger Throttle Control Cable Assembly
Part Number: 3L5Z-9A758-BA$28.84 MSRP: $52.89You Save: $24.05 (46%)
Ford Ranger Accelerator Cable
The Ford Ranger Accelerator Cable enables the driver's foot to quickly open the throttle plate and allow the engine to receive the right mix of air and fuel for power. In carbureted versions of Ford trucks, it connects the pedal to the throttle lever. As the pedal moves, the braided steel core slides inside the sheath. Furthermore, the Accelerator Cable pivots the plate and opens up extra passages, which draw more fuel through the venturi. Early Ranger trucks sometimes applied a rigid rod linkage, but most went to a flexible Accelerator Cable not long after. Such a cable is able to be routed better around engine components, offers smoother motion, and transmits less vibration at the pedal. Despite having the same goal, the cable weighs less in design and can be replaced without disturbing manifold hardware. The current Ford Ranger trucks continue to depend on an Accelerator Cable to command throttle body operation even though fuel is no longer drawn out of a float bowl but injected from injectors. Regular inspection of the Accelerator Cable keeps every Ford Ranger responsive and safe.
We provide a wide range of Ford Ranger Accelerator Cable at the optimal prices. If you need Ford Ranger Accelerator Cable, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.
Ford Ranger Accelerator Cable Parts Questions & Experts Answers
- Q: How to remove and install the accelerator cable on Ford Ranger?A:First, for example, the assembly and fastening of the accelerator linkage shield, which is provided over the accelerator cable linkage, must be loosened. This is done by unclipping the accelerator cable from the throttle lever ball stud at the Throttle Body using a hairpin clip. Then, unbolt the cable from the bracket on the Intake Manifold, however, depending on the later models the position of the bracket may be different. Locating the accelerator pedal from inside the vehicle, unscrew the cables end that is fixed atop the accelerator pedal. Open the retaining clips at the dash panel and pass the cable through the dash panel to the engine area. To install it back reverse the order you used to remove it and be certain not to allow any wires or hoses to touch any part of the accelerator controls that is moving. This should be checked with the engine off and the accelerator pedal firmly pushed to the floor before starting the engine. After bringing the engine to life inspect the throttle operation and a similar operation when the accelerator pedal is released normalising the rpm.
Related Ford Ranger Parts
Browse by Year
2011 Accelerator Cable 2010 Accelerator Cable 2009 Accelerator Cable 2008 Accelerator Cable 2007 Accelerator Cable 2006 Accelerator Cable 2005 Accelerator Cable 2004 Accelerator Cable 2003 Accelerator Cable 2002 Accelerator Cable 2001 Accelerator Cable 2000 Accelerator Cable 1999 Accelerator Cable 1998 Accelerator Cable 1997 Accelerator Cable 1996 Accelerator Cable 1995 Accelerator Cable 1994 Accelerator Cable 1993 Accelerator Cable 1992 Accelerator Cable 1991 Accelerator Cable