My Garage
My Account
Cart
Genuine Ford Explorer Sport Trac Wiper Motor
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Wiper Motors found
Ford Explorer Sport Trac Motor Assembly - Wiper
Part Number: 6L5Z-17508-AA$123.12 MSRP: $196.36You Save: $73.24 (38%)Ships in 1-3 Business DaysFord Explorer Sport Trac Motor And Linkage Assembly
Part Number: F87Z-17508-AB$123.12 MSRP: $196.36You Save: $73.24 (38%)Ships in 1-3 Business Days
Ford Explorer Sport Trac Wiper Motor
The Wiper Motor in Ford Explorer Sport Trac plays a very important role as it is responsible of operating the windshield wipers to help remove rain and other materials to enhance vision. This electric motor also has different speeds for the wiper movement depending with the weather that the driver is experiencing. In the case of Ford Explorer Sport Trac Wiper Motors, the types which are available include new wiper motors as well as refurbished wiper motors. New Wiper Motors is a motor that is fully manufactured with the latest model while refurbished one is actually a used motor that has been modified and established to fit the current generation standards. This variety allows the Ford Explorer Sport Trac consumers to get the optimal of both worlds but at the same time having useful wiper operations.
We provide a wide range of Ford Explorer Sport Trac Wiper Motor at the best prices possible. If you need Ford Explorer Sport Trac Wiper Motor, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Ford Explorer Sport Trac Wiper Motor Parts Questions & Experts Answers
- Q: How do you remove and install the front and rear wiper motors on Ford Explorer Sport Trac?A:Rotate the front windshield wiper switch on and the switch on the ignition and have your hand on the key until the wiper blades are towards the straight up position, switch off the ignition. Remove the nuts from the cell bottom as well as the right side Wiper Arm and blade assembly. On the models from 1991 to 1996, unbolt the pivot nut on the right side of the linkage post and let the linkage falls down into the cowl. For all cars of the 1997 and later, Release both cowl vent as panels before continuing. For the models between 1991 and 1996, you should start by withdrawing the wiper linkage access cover, from the inside of the car you will unsnap the wiper motor clip and slide it away from the crank pin nib on the linkage and pop it off. Pull out the wiper linkage from the motor crank pin and in case of models 1997 and later, dismantle the linkage arms by pulling the clips at the ends of the arms, likewise, remove the cowl vent panels and remove the linkages from the motor. Unplug the wire harness connection to the motor, and unbolt the motor, kindly note that some of the bolts are stud/bolts; you have to remove the nut besides the ground strap or harness. Of course the opposite of removal, ensure the wiper blades are in the park position before installing the linkage to the motor. For the rear wiper motor you need to remove the negative cable from the battery, then remove the wiper blade from the window as it has to be lifted off the motor spindle. Disconnect the lift gate trim panel, UNSCREW the motor bracket screws, an extract the motor as well as bracket from the grommet. Remove the electrical connector of the vehicle, the wiring locator pins and also the motor. Installation also takes place in the reverse sequence to removal.
