How should you safely detach and install the hood on Ford Expedition?

Keep the hood or rear liftgate open, and two people need to help because it's heavy and hard to handle. Unclip the retaining clips at each strut end with a screwdriver. Then pull or push hard to pull the strut free from its place. Someone else must hold up the liftgate while you get ready to take out the support strut. Unclip the strut using a small screwdriver, pull it out, and get the clip off the bottom end where it fits on the car. Installation is the reverse of removal.

Genuine Ford Expedition Hood

Engine Hood

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Hoods found

View related parts
Ford Expedition Hood Assembly
Part Number: 7L1Z-16612-A
$988.75 MSRP: $1471.35
You Save: $482.60 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Assy; Hood
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2017 Ford Expedition | 6 Cyl 3.5L GTDI, 8 Cyl 5.4L | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Hood Assembly
Part Number: JL1Z-16612-A
$863.89 MSRP: $1285.55
You Save: $421.66 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Assy; Hood
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.5L GTDI | 10-Speed Automatic Transmission (10R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Hood Assembly
Part Number: SL1Z-16612-A
$754.56 MSRP: $1122.85
You Save: $368.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HOOD ASY; Hood
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2025 Ford Expedition | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Hood Assembly
Part Number: F65Z-16612-AL
Product Specifications
- Other Name: Hood Assy; Hood
- Manufacturer Note: U/8500 GVW
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | 8 Cyl 4.6L, 8 Cyl 5.4L | 4AT 4R100, 4AT 4R70W, 4AT E4OD
View related parts
Ford Expedition Hood Assembly
Part Number: 2L1Z-16612-AA
Product Specifications
- Other Name: Hood Assy; Hood
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Ford Expedition | 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.4L, 8 Cyl 5.4L Modular SOHC | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Ford Expedition Hood

The Hood of the Ford Expedition is the first defense shield for the powertrain. The Hood covers the engine from the rain, debris, and other harmful materials while quickly allowing the owner access for servicing. Throughout the years, Ford has engineered the Hood on each generation to provide a combination of rugged strength with lighter construction. This ensures the closure always feels solid yet effortless. The early Expedition variants employed a more angular Hood design that conveyed durability, while the later editions made use of smoother sculpted surfaces that created less drag, improving aerodynamics and cabin quietness. Any or all styles of the Ford Hood must lock down tightly to block moisture and dust but open easily through a front latch that releases via a simple pull. In this way, routine checks stay hassle free. Under the panel, there are sound-dampening layers designed to hush engine noise. Similarly, careful shaping allows the SUV to maintain its assertive looks without significant weight. In short, the Hood on any Ford Expedition has a combination of protection, functionality, and aesthetics along with being a crucial body panel.

We provide a wide range of Ford Expedition Hood at the optimal prices. If you need Ford Expedition Hood, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Ford Expedition Hood Parts Questions & Experts Answers

Hood Assembly
7L1Z-16612-A
Q: How should you safely detach and install the hood on Ford Expedition?
A:
Keep the hood or rear liftgate open, and two people need to help because it's heavy and hard to handle. Unclip the retaining clips at each strut end with a screwdriver. Then pull or push hard to pull the strut free from its place. Someone else must hold up the liftgate while you get ready to take out the support strut. Unclip the strut using a small screwdriver, pull it out, and get the clip off the bottom end where it fits on the car. Installation is the reverse of removal.