My Garage
My Account
Cart
Genuine Ford Crown Victoria Throttle Cable
Accelerator Throttle Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Throttle Cables found
Ford Crown Victoria Throttle Cable
The Ford Crown Victoria Throttle Cable gives the driver direct control over engine air intake by linking the gas pedal to the throttle plate. In early Ford models of the Crown Victoria, this braided metal Throttle Cable stretches from the pedal through the firewall to the throttle body, so every foot press pulls the butterfly valve open and lets the PCM raise fuel delivery. The setup is simple, responsive, and easy to spot during under-hood checks, yet friction or fraying can cause a Throttle Cable to stick that robs power. Later Ford police sedans and civilian Crown Victoria versions adopted Electronic Throttle Control which replaces the mechanical Throttle Cable with pedal position sensors and an electric motor on the throttle body, improving safety features like traction control. Drivers should note this change because repair steps and feel at the pedal differ between styles. Replacing a worn Throttle Cable on a cable-equipped Crown Victoria typically falls in a modest cost range, making regular inspection worthwhile to keep the Ford V8 running smoothly.
We provide a wide range of Ford Crown Victoria Throttle Cable at the optimal prices. If you need Ford Crown Victoria Throttle Cable, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.
Ford Crown Victoria Throttle Cable Parts Questions & Experts Answers
- Q: What is the role of the Throttle Cable in controlling transmission performance on Ford Crown Victoria?A:The Throttle Cable and linkage control transmission line pressure, shift points, shift feel, part throttle downshifts, and detent downshifts. A broken, sticky, or misadjusted throttle cable linkage can lead to issues such as early or soft upshifts, no downshift, or harsh downshift function. Ensure the engine is off and the shift lever is in Neutral for the adjustment. Begin by removing the air cleaner assembly and inlet tube to access the throttle cable at the throttle lever. Use a wide-bladed screwdriver to pry the grooved pin on the cable assembly out of the grommet on the throttle body lever. Push the white locking tab out with a small screwdriver. Confirm that the plastic block with the pin and tab slides freely on the notched rod; if it doesn't, the white tab may not be pushed out far enough. Firmly hold the throttle lever against the Idle stop and push the grooved pin into the grommet on the throttle lever as far as it will go, ensuring the throttle lever remains against the idle stop during this process. Finally, reinstall the air cleaner assembly.
