How often should the Door Hinge, Door Latch Assembly, Door Lock, Hood Hinge, Hood Latch and Trunk Latch be lubricated on Ford Crown Victoria?

Every 3000 miles of drive or once in 3 months the hinges and latch assembly of the doors, the hood and the trunk should be lubricated by a few drops of light oil or lock lubricant. Also the door latch strikers must be oiled smeared thinly with grease to reduce wear and make the door to open easily. Also it is advised to spray the locks of the door and the trunk with the spray-on graphite lubricant.

Genuine Ford Crown Victoria Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Hood Hinges found

View related parts
Ford Crown Victoria Hood Hinge Assembly
Part Number: 6W7Z-16797-A
$16.40 MSRP: $23.98
You Save: $7.58 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assy - Hood; Hinge
- Position: Driver Side
- Replaces: F8AZ-16797-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R70W, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Hood Hinge Assembly
Part Number: F8AZ-16797-AA
$16.40 MSRP: $23.98
You Save: $7.58 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assy - Hood
- Position: Driver Side
- Replaced by: 6W7Z-16797-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Hood Hinge Assembly
Part Number: F8AZ-16796-AA
$16.41 MSRP: $22.42
You Save: $6.01 (27%)
ADD TO CART
Product Specifications
- Other Name: Hinge Assy - Hood
- Position: Passenger Side
- Replaced by: 6W7Z-16796-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Hood Hinge Assembly
Part Number: 6W7Z-16796-A
$16.41 MSRP: $22.42
You Save: $6.01 (27%)
ADD TO CART
Product Specifications
- Other Name: Hinge Assy - Hood; Hinge
- Position: Passenger Side
- Replaces: F8AZ-16796-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R70W, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Hinge Assembly Hood
Part Number: F2AZ16797A
Product Specifications
- Other Name: Hinge Assy - Hood; Hinge
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1997 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Hinge Assembly Hood
Part Number: F2AZ16796A
Product Specifications
- Other Name: Hinge Assy - Hood; Hinge
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1997 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD, 4AT AOD-E

Ford Crown Victoria Hood Hinge

The Ford Crown Victoria Hood Hinge is applied to enable the sedan's large hood to pivot safely, stay aligned, and provide quick access to the engine and closure. It is gripped and installed between the steel hood panel and cowl. Each Hood Hinge is capable of supporting a significant load. The bolts use an arm and a pin joint working like a lever. Lifting the hood is light, and closing it seals the latch firmly. Each Crown Victoria features a pair of spring-assisted Hood Hinge units on either side. These spring-assisted units help balance the load and prevent dangerous flutter at speed. The early models, along with the later Police Interceptor trims, use the same stamped steel style. The changes are just minor updates to the spring tension and the corrosion coating. This is not a new design. Regular inspection of each Hood Hinge while changing oil will keep a Ford owner ahead of trouble since a Crown Victoria depends on properly greased pivots for long life. Your Ford Crown Victoria will be back in mint condition with drivers' OE Ford Hood Hinge. A genuine Ford hinge will fit and function just like the original, bringing the hood back to smooth, confident motion.

We provide a wide range of Ford Crown Victoria Hood Hinge at the optimal prices. If you need Ford Crown Victoria Hood Hinge, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Ford Crown Victoria Hood Hinge Parts Questions & Experts Answers

Hood Hinge Assembly
6W7Z-16797-A
Q: How often should the Door Hinge, Door Latch Assembly, Door Lock, Hood Hinge, Hood Latch and Trunk Latch be lubricated on Ford Crown Victoria?
A:
Every 3000 miles of drive or once in 3 months the hinges and latch assembly of the doors, the Hood and the trunk should be lubricated by a few drops of light oil or lock lubricant. Also the door latch strikers must be oiled smeared thinly with grease to reduce wear and make the door to open easily. Also it is advised to spray the locks of the door and the trunk with the spray-on graphite lubricant.