How do you remove and install a fender on Ford Crown Victoria?

Before we begin any operation, park the vehicle, engage the handbrake and then roll the car backwards to apply some reverse angle before jacking up the vehicle from the front using jackstands and then removes the front wheel. Then, remove the splash shield from the fender and the body and then carry out the following measures. Remove the bolts in the antenna and other connecting parts such as the wiring harness for bulb connectors and any other which will hinder the removal of the fenders. Go ahead to take out the fender mounting bolts and nut, then unbolt the fender, and as you take it off make sure there is someone helping you to balance it and move it off the vehicle to prevent scratching the rest of the body. When installing the same should be done in the order that is the reverse of the removal process to which all nuts bolts and screws were tightened.

Genuine Ford Crown Victoria Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fenders found

View related parts
Ford Crown Victoria Fender Assembly - Front
Part Number: 4W7Z-16005-AA
$314.14 MSRP: $463.33
You Save: $149.19 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Assy - Front
- Position: Passenger Side
- Replaced by: 7W7Z-16005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R75W
View related parts
Ford Crown Victoria FENDER ASY - FRONT
Part Number: F2AZ16005A
$232.71 MSRP: $320.60
You Save: $87.89 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Fender Assembly - Front
Part Number: 7W7Z-16006-A
$303.76 MSRP: $452.02
You Save: $148.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Assy - Front; Fender
- Position: Driver Side
- Replaces: 4W7Z-16006-AA, F8AZ-16006-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
- 1998-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Fender Assembly - Front
Part Number: 7W7Z-16005-A
$314.14 MSRP: $463.33
You Save: $149.19 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Assy - Front; Fender
- Position: Passenger Side
- Replaces: 4W7Z-16005-AA, F8AZ-16005-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
- 1998-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Fender Assembly - Front
Part Number: F8AZ-16005-AA
$314.14 MSRP: $463.33
You Save: $149.19 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Assy - Front
- Position: Passenger Side
- Replaced by: 7W7Z-16005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Fender Assembly - Front
Part Number: 4W7Z-16006-AA
$303.76 MSRP: $452.02
You Save: $148.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Assy - Front
- Position: Driver Side
- Replaced by: 7W7Z-16006-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R75W
View related parts
Ford Crown Victoria Fender Assembly - Front
Part Number: F8AZ-16006-AA
$303.76 MSRP: $452.02
You Save: $148.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Assy - Front
- Position: Driver Side
- Replaced by: 7W7Z-16006-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W

Ford Crown Victoria Fender

We provide a wide range of Ford Crown Victoria Fender at the best prices possible. If you need Ford Crown Victoria Fender, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Crown Victoria Fender Parts Questions & Experts Answers

Fender Assembly - Front
4W7Z-16005-AA
Q: How do you remove and install a fender on Ford Crown Victoria?
A:
Before we begin any operation, park the vehicle, engage the handbrake and then roll the car backwards to apply some reverse angle before jacking up the vehicle from the front using jackstands and then removes the front wheel. Then, remove the splash shield from the fender and the body and then carry out the following measures. Remove the bolts in the antenna and other connecting parts such as the wiring harness for bulb connectors and any other which will hinder the removal of the fenders. Go ahead to take out the fender mounting bolts and nut, then unbolt the fender, and as you take it off make sure there is someone helping you to balance it and move it off the vehicle to prevent scratching the rest of the body. When installing the same should be done in the order that is the reverse of the removal process to which all nuts bolts and screws were tightened.