What are the function and structure of the rear axle shaft assembly, and what are the common issues and diagnostic procedures associated with it on 2010 Ford Ranger?

The rear axle assembly is a hypoid semi-floating type, featuring a differential carrier made from casting with a pressed steel cover, while the axle tubes are constructed from steel, pressed and welded into the carrier. An optional Traction-Lok limited slip rear axle is available, which operates normally until one wheel loses traction, utilizing multi-disc clutch packs and a speed-sensitive engagement mechanism to lock both axleshafts together, providing equal rotational power to both wheels. Knowing the axle identification number, located on a small metal tag near one of the cover bolts, is crucial for certain operations, especially when replacing the axleshafts. Often, issues suspected in the rear axle area may actually originate elsewhere, so a thorough check is advisable before concluding a rear axle problem. Common noises associated with rear axle diagnosis include road noise, which can be mistaken for mechanical faults and remains consistent regardless of vehicle power; tire noise, which can arise from worn or under-inflated tires and remains constant during various driving conditions; and engine and transmission noise, which can mislead diagnostics as it travels along the driveline. To isolate such noises, noting the engine speed at which the noise is most pronounced and then running the engine in Neutral at the same speed can help determine if the rear axle is at fault. Overhaul and general repair of the rear axle require special tools and critical measurements, making it beyond the scope of the home mechanic, with procedures involving axleshaft removal and installation, oil seal replacement, bearing replacement, and complete unit removal for repair or replacement.

Genuine 2010 Ford Ranger Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Axle Shafts found

View related parts
2010 Ford Ranger Axle Assembly
Part Number: 6L5Z-3A428-AA
$153.77 MSRP: $249.09
You Save: $95.32 (39%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle; Axle Assembly, Outer Joint Assembly, Shaft & Joint
- Position: Passenger Side
- Replaces: 2L2Z-3B436-AA
- Base No.: 3B436
- Item Weight: 14.90 Pounds
- Item Dimensions: 26.3 x 5.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-3A428-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2010 Ford Ranger Submodels:
- 4 Cyl 2.3L NA Petrol, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
2010 Ford Ranger Inner Axle Shaft
Part Number: 1L2Z-3219-AA
$86.28 MSRP: $126.13
You Save: $39.85 (32%)
Product Specifications
- Other Name: Shaft - Front Axle
- Manufacturer Note: 2001/ Axle Shaft
- Position: Front
- Replaces: F67Z-3N387-AA
- Base No.: 3219
- Item Weight: 6.50 Pounds
- Item Dimensions: 4.1 x 4.0 x 23.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-3219-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2010 Ford Ranger Submodels:
- 4 Cyl 2.3L NA Petrol, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
2010 Ford Ranger Rear Axle Shaft Assembly
Part Number: AL5Z-4234-B
Product Specifications
- Other Name: Shaft Assy - Rear Axle; Axle Shaft, Axle Shafts
- Position: Driver Side
- Base No.: 4234
- Item Dimensions: 30.3 x 6.8 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL5Z-4234-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2010 Ford Ranger Submodels:
- 4 Cyl 2.3L NA Petrol, 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
2010 Ford Ranger Rear Axle Shaft Assembly
Part Number: AL5Z-4234-A
Product Specifications
- Other Name: Shaft Assy - Rear Axle; Axle Shaft, Axle Shafts
- Position: Passenger Side
- Base No.: 4234
- Item Dimensions: 30.9 x 6.8 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL5Z-4234-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2010 Ford Ranger Submodels:
- 4 Cyl 2.3L NA Petrol, 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
2010 Ford Ranger Front Axle Shaft
Part Number: 6L5Z-3A427-AA
$171.46 MSRP: $276.36
You Save: $104.90 (38%)
Product Specifications
- Other Name: Shaft - Front Axle; Axle Assembly, Outer Joint Assembly, Shaft & Joint
- Position: Driver Side
- Replaces: 2L2Z-3B437-AA
- Base No.: 3B436
- Item Weight: 14.70 Pounds
- Item Dimensions: 4.6 x 4.8 x 28.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-3A427-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2010 Ford Ranger Submodels:
- 4 Cyl 2.3L NA Petrol, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L SOHC EFI | 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
2010 Ford Ranger Joint And Stub Shaft Assembly
Part Number: F5TZ-3B414-B
Product Specifications
- Other Name: Joint And Stub Shaft Assy; Inner Joint, Inner Joint Assembly
- Position: Driver Side
- Base No.: 3B414
- Item Weight: 4.70 Pounds
- Item Dimensions: 26.6 x 5.3 x 18.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5TZ-3B414-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2010 Ford Ranger Submodels:
- 4 Cyl 2.3L, 4 Cyl 2.3L NA Petrol, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L, 6 Cyl 4.0L SOHC EFI | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT, 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
2010 Ford Ranger Joint and Stub Shaft Assembly
Part Number: F5TZ-3B414-A
Product Specifications
- Other Name: Joint And Stub Shaft Assy; Inner Joint, Inner Joint Assembly
- Position: Passenger Side
- Base No.: 3B414
- Item Weight: 4.70 Pounds
- Item Dimensions: 34.2 x 6.1 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5TZ-3B414-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2010 Ford Ranger Submodels:
- 4 Cyl 2.3L, 4 Cyl 2.3L NA Petrol, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.0L OHV EFI, 6 Cyl 4.0L, 6 Cyl 4.0L SOHC EFI | 4AT 4R44E, 5AT 5R44E, 5AT 5R55E, 5MT, 5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

2010 Ford Ranger Axle Shaft

At FordPartsGiant.com, you will find an extensive inventory of genuine 2010 Ford Ranger Axle Shaft offered at competitive prices online. These manufacturer-backed OEM 2010 Ford Ranger Axle Shaft ensure your satisfaction with their quality and come with a hassle-free return policy and expedited delivery service, guaranteeing a delightful shopping experience.

2010 Ford Ranger Axle Shaft Parts Questions & Experts Answers

Q:
What are the function and structure of the rear axle shaft assembly, and what are the common issues and diagnostic procedures associated with it on 2010 Ford Ranger?
Posted by Henryette D.
A:
The rear axle assembly is a hypoid semi-floating type, featuring a differential carrier made from casting with a pressed steel cover, while the axle tubes are constructed from steel, pressed and welded into the carrier. An optional Traction-Lok limited slip rear axle is available, which operates normally until one wheel loses traction, utilizing multi-disc clutch packs and a speed-sensitive engagement mechanism to lock both axleshafts together, providing equal rotational power to both wheels. Knowing the axle identification number, located on a small metal tag near one of the cover bolts, is crucial for certain operations, especially when replacing the axleshafts. Often, issues suspected in the rear axle area may actually originate elsewhere, so a thorough check is advisable before concluding a rear axle problem. Common noises associated with rear axle diagnosis include road noise, which can be mistaken for mechanical faults and remains consistent regardless of vehicle power; tire noise, which can arise from worn or under-inflated tires and remains constant during various driving conditions; and engine and transmission noise, which can mislead diagnostics as it travels along the driveline. To isolate such noises, noting the engine speed at which the noise is most pronounced and then running the engine in Neutral at the same speed can help determine if the rear axle is at fault. Overhaul and general repair of the rear axle require special tools and critical measurements, making it beyond the scope of the home mechanic, with procedures involving axleshaft removal and installation, oil seal replacement, bearing replacement, and complete unit removal for repair or replacement.
Answered by Ford Parts Specialist Patrick / Dec 6, 2022