How to remove and install the oil pump in 4.0L SOHC V6 engine on 2001 Ford Explorer?

To remove the lower and upper oil pan sections, either remove the engine from the vehicle or raise the engine. Next, take off the oil pump by removing the bolts. Pull the oil pump intermediate driveshaft out of the engine. For installation, fill one of the pump ports with clean engine oil and rotate the pump by hand to prime it. Insert the intermediate drive shaft into the engine, ensuring it engages the oil pump drive and that the travel limit clip is in place, positioned closer to the camshaft position sensor end. Install the oil pump on the block with a new gasket, ensuring it engages the driveshaft, then install and tighten the oil pump bolts to the specified torque. The remainder of the installation follows the reverse order of removal. After completing the installation, run the engine and ensure that oil pressure rises to normal quickly; if it does not, stop the engine and investigate the cause to prevent severe engine damage from insufficient oil pressure.

Genuine 2001 Ford Explorer Oil Pump

Oil Fluid Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oil Pumps found

View related parts
2001 Ford Explorer Kit - Transmission Pump And Bearing
Part Number: XL2Z-7A103-AA
$180.58 MSRP: $264.00
You Save: $83.42 (32%)
ADD TO CART
Product Specifications
- Replaced by: XL2Z-7A103-AB
- Item Weight: 5.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL2Z-7A103-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2001 Ford Explorer Submodels:
- 6 Cyl 4.0L, 8 Cyl 5.0L | 4AT 4R70W, 5AT 5R55E
View related parts
2001 Ford Explorer Oil Pump Assembly
Part Number: F6TZ-6600-AC
$100.70 MSRP: $147.22
You Save: $46.52 (32%)
ADD TO CART
Product Specifications
- Other Name: Pump Assy - Oil
- Replaced by: XL2Z-6600-AA
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6TZ-6600-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Explorer Submodels:
- 6 Cyl 4.0L | 4AT 4R44E, 4AT 4R55E, 4AT 4R70W, 4AT A4LD, 4AT AODE-E, 4AT AODE-W, 5AT 5R55E, 5MT
View related parts
2001 Ford Explorer Oil Pump Assembly
Part Number: F77Z-6600-CA
Product Specifications
- Other Name: Pump Assy - Oil
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F77Z-6600-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2001 Ford Explorer Submodels:
- 8 Cyl 5.0L | 4AT 4R55E, 4AT 4R70W, 5AT 5R55E, 5MT
View related parts
2001 Ford Explorer Oil Pump Assembly
Part Number: F4AZ-7A103-A
Product Specifications
- Other Name: Pump Assy - Oil
- Base No.: 7A103
- Item Weight: 16.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F4AZ-7A103-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Explorer Submodels:
- 6 Cyl 4.0L, 8 Cyl 5.0L | 4AT 4R55E, 4AT 4R70W, 5AT 5R55E

2001 Ford Explorer Oil Pump

At FordPartsGiant.com, you will find an extensive inventory of genuine 2001 Ford Explorer Oil Pump offered at competitive prices online. These manufacturer-backed OEM 2001 Ford Explorer Oil Pump ensure your satisfaction with their quality and come with a hassle-free return policy and expedited delivery service, guaranteeing a delightful shopping experience.

2001 Ford Explorer Oil Pump Parts Questions & Experts Answers

Q: How to remove and install the oil pump in 4.0L SOHC V6 engine on 2001 Ford Explorer?
A: To remove the lower and upper oil pan sections, either remove the engine from the vehicle or raise the engine. Next, take off the oil pump by removing the bolts. Pull the oil pump intermediate driveshaft out of the engine. For installation, fill one of the pump ports with clean engine oil and rotate the pump by hand to prime it. Insert the intermediate drive shaft into the engine, ensuring it engages the oil pump drive and that the travel limit clip is in place, positioned closer to the camshaft position sensor end. Install the oil pump on the block with a new gasket, ensuring it engages the driveshaft, then install and tighten the oil pump bolts to the specified torque. The remainder of the installation follows the reverse order of removal. After completing the installation, run the engine and ensure that oil pressure rises to normal quickly; if it does not, stop the engine and investigate the cause to prevent severe engine damage from insufficient oil pressure.