Mercury F67Z-7823209-AA Regulator Assembly

Before the trim panel and the watershield are removed, the power window electrical connector of the regulator should be disconnected if the car is fitted with one. Then Moisten the new door window glass and insert it securely in the fully raised position of the car door before finally removing it. Then remove the nuts and washers fixing the window guide, if any; pull up the guide from the door through the top. In power windows, the motor bracket rivets have to be drilled at the center next to which the regulator rivets as well as the nuts have to be taken off. For installation reverse all the aforesaid removal procedures and be careful to fasten the regulator rivets with 1/4-20 x 112inch bolts, nuts and washers or metric equivalent if available. Last, open an close the window few time to see how it function and then refit the watershield and trim panel.