Lincoln FOVY-13008-A Headlamp Assembly

The headlights must be aimed correctly to avoid accidents and ensure good visibility. They should be checked every 12 months and after any headlight replacement or front end body work. Adjusting screws control the up-and-down and left-and-right movement of the headlights. The simplest method for adjustment requires a blank wall, level floor, and masking tape. Position the tape vertically and horizontally in reference to the vehicle centerline and headlight centerlines. Adjust the low beam so the high intensity zone is two inches below and to the right of the horizontal line. Use the adjusting screws to raise, lower, move left, or move right. For the high beams, the high intensity zone should be vertically centered just below the horizontal line. If a compromise is necessary, prioritize the correct aim for the low beams. Get the headlights adjusted by a professional as soon as possible.

The installation is the reverse of the removal procedure.