Ford F87Z-2267-CA Brake Tube Assembly

Prefabricated brake lines with the tube ends already flared and fittings installed, sometimes bent to the proper shapes.

The rubber hoses should be inspected about every six months.

1. Park the vehicle on level ground and turn the engine off. 2. Remove the wheel covers. Loosen, but do not remove, the lug nuts on all four wheels. 3. Raise the vehicle and support it securely on jackstands. 4. Remove the wheels. 5. Check all brake lines and hoses for cracks, chafing of the outer cover, leaks, blisters, and distortion. Check the brake hoses at the front and rear of the vehicle for softening, cracks, bulging, or wear from rubbing on other components. Check all threaded fittings for leaks and make sure the brake hose mounting bolts and clips are secure. 6. If leaks or damage are discovered, they must be fixed immediately.