Ford 4L2Z-13K359-AAA Direction Indicator Switch Assembly

Remove the steering wheel.Remove the screws that secure the instrument panel trim piece below the steering column and take the trim piece off.On models equipped with a tilt steering wheel, squeeze the upper extension shroud at the six and twelve o'clock positions and release it from the retaining plate.Remove the two screws securing the steering column upper and lower shrouds and remove both shrouds.Remove the two screws securing the switch assembly to the steering column.Use a small screwdriver and release the tangs, then pull the electrical connector from the switch.Remove the switch assembly.Installation is the reverse of the removal steps. Be sure the horn harness grommet is positioned correctly. Check the steering column and switch for proper operation.