Ford 7L5Z-7E395-B Selector Lever Control Cable Assembly

Use a screwdriver to pry the end fitting from the steering column lever ball stud, then remove the nuts securing the shill cable bracket to the steering column bracket and take off the bracket. Raise the vehicle and support it securely on jackstands. While working under the vehicle, pull down on the lock tab on the shift cable and remove the fitting from the manual lever ball stud with a screwdriver, disconnecting the shift cable from the transmission manual shift lever, and work the cable through the grommet in the firewall. Bend back the retaining tab to disengage the cable from the transmission bracket, slide the cable down from the transmission bracket, and remove it. For installation, reverse the removal procedure while adjusting the shift linkage, then remove the jackstands and lower the vehicle to the ground.