Ford 2L1Z-3084-AA Arm Assembly - Front Suspension

Yes, warnings about specific procedures are mentioned.

Position a floor jack with a wood block under the lower control arm to relieve spring pressure from the upper control arm. Mark the position of the upper control arm camber adjustment cam. If the vehicle has a 4-wheel anti-lock brake system (4WABS), remove the bracket bolt for the wheel speed sensor wire and place the sensor wire out of harm's way.

When dealing with stubborn fasteners due to rust or corrosion, use penetrating oil, wire brushes, and caution. Strategies like applying a sharp blow with a hammer, heating the fastener area, or using breaker bars can help. However, exercise caution to prevent thread damage or fire hazards. Replace difficult-to-unscrew fasteners with new ones. For safety, use reliable jackstands and prefer a hydraulic floor jack for lifting and supporting components during various operations.