O-ring; For Upper Metal injector sleeve to injector. 20.7mm OD., Bi-Fuel; Gas/LPG O-ring; For Upper Metal injector sleeve to injector. 20.7mm OD., Bi-Fuel; Gas/NGV
Rubber dust cap with loop end of tether to fit over fill valve 9C112. Will retrofit for all fill valves., Gas/NGV Bi-Fuel Rubber dust cap with loop end of tether to fit over fill valve 9C112. Will retrofit for all fill valves., NGV
Used with Aft Axle fuel tank. Mount between 9H307 & 9002, (Cutaway/Stripped Chassis) Used with Aft Axle fuel tank. Mount between 9H307 & 9002. 6 inches diameter w/ 6 bolt holes, (Cutaway/Stripped Chassis)
#2 in illustration - Return hose, less a/c, 5/8" quick connect #2 in illustration - Return hose, less high output (auxiliary) heater/ac, 5/8" quick connect #2 in illustration - Return hose, with manual ac and less heater/ac prep pack or less heater/ac prep pack deluxe, 5/8" quick connect
#1 in illustration. Supply hose., less a/c, 3/4" quick connect #1 in illustration. Supply hose., less high output (auxiliary) heater/ac, 3/4" quick connect #1 in illustration. Supply hose., with manual ac and less heater/ac prep pack or less heater/ac prep pack deluxe, 3/4" quick connect
Mating part, 14028 , w/power windows & power door locks, Wiring Circuit: 9, Color: Black Mating part, 14529 , w/power windows & power door locks, Wiring Circuit: 9, Color: Black
Jumper used in "B" pillar. Connects to 14A200. Used for power, radio feeds. Also included in camper/upfitters kit YC2Z-13A576-AAA., RV, modified vehicle options
Jumper, connects to 14A200 either in "B" pillar area or above headliner on RH side. Used for power and auxiliary A/C feeds. Also included in camper/upfitter kit YC2Z,13A576,AAA , RV, modified vehicle, cutaway
Jumper used in "B" pillar. Connects to 14A200 to provide power, radio, courtesy lamp feeds. Also included in Camper/upfitters kit YC2Z,13A576,AAA , RV, modified vehicle options
F8UB-14406-G*, XC25-14406-G*, includes fuel lines, brake lines & organizer, w/138" or 158" W/B, regular or extended van, school bus or ambulance, without T/T, FROM 3/98
Located at end of fuel tank. Also serviced in 9002. Includes 9039 O'ring, GFI#1702X1F(tank valve), Gas/NGV Bi-Fuel Located at end of fuel tank. Also serviced in 9002. Includes 9039 O'ring, GFI#1702X1F(tank valve), NGV
(TYPE 2) French Graphics: "NOTICE (diagnosis testing): DO NOT perform the following", 5.4L GAS/CNG Bi-fuel (TYPE 2) French Graphics: "NOTICE (diagnosis testing): DO NOT perform the following", 5.4L GAS/LPG Bi-fuel
Jumper from canister to front vapor line; 28" long x 1/2" id., gas -extended Vans/Wagons Jumper from canister to front vapor line; 28" long x 1/2" id., gas-regular Vans/Wagons, BEFORE 1/1/99
Midship - 2 Tube Ports. 4 wire pigtail. Mounting gasket F57U-9276-AC included in 9H307. Note: Before 11/1/96, exhaust 9A407 stock, then use 9H307., 4.2L, 4.6L, FROM 11/1/96
Midship - 2 Tube Ports. 4 wire pigtail. Mounting gasket F57U-9276-AC included in 9H307. Note: Before 11/5/96, exhaust 9A407 stock, then use 9H307., 5.4L, 6.8L, FROM 11/5/96
Midship - 3 Tube Ports. 4 wire pigtail. Mounting gasket F57U-9276-AC included in 9H307. Note: Before 12/3/96, exhaust stock of 9A407, then use 9H307., 5.4L, 6.8L, FROM 12/3/96
Wording in English. See instructions on fuel container for inspection and service life, 5.4L, GAS/NGV Bi-Fuel
Base Number:
9A095
Callout Name:
9A095
Genuine Ford Parts, the Right Choice
FordPartsGiant.com offers the wholesale prices for genuine 1998 Ford E-250 parts. Parts like Fuel Lines & Related Parts are shipped directly from authorized Ford dealers and backed by the manufacturer's warranty. Parts fit for the following vehicle options. Engine: 8 Cyl 5.4L. Transmission: 4AT 4R70W.