Customer Support: Live Chat or 1-888-788-9341
- Parts for:
- Ford
- Lincoln
- Mercury
- Accessories
- Login/Register
- My Account
- Track Order
- Help Center
My Cart
Internal Parts-Clutches, Gears, Shafts, Governor & Related Parts fit your 1994 Ford F-150 8 Cyl 5.8L 4AT 4R70W 8 Cyl 5.8L 4-Speed Automatic Transmission 4R70W
View by Part No.
Part No.
Part Description
Retail
Price
Price
Your
Price
Price
Qty.
Band Assy - Overdrive2" wide- Base Number:7F196
- Callout Name:7F196
- Base Number:
- BAND ASY. (REVERSE CLUTCH)
Bearing#7 thrust- Callout Name:7F243
- Replaced By:3L3Z-7F243-AA
- Callout Name:
Bearing#8 thrust- Base Number:7F240
- Callout Name:7F240
- Base Number:
Washer - Thrust#3 thrust- Callout Name:7F231
- Replaced By:3L3Z-7F231-AA
- Callout Name:
Washer#2 thrust bearing- Callout Name:7A166
- Replaced By:3L3Z-7A166-AA
- Callout Name:
BearingLocated between 7B446 and 7A658- Callout Name:7F240
- Replaced By:3C3Z-7F240-AA
- Callout Name:
Bearing Assy - ThrustLocated between 7A399 & 7A019 - #5 thrust bearing - 2-3/64" O.D.- Base Number:7F244
- Callout Name:7F244
- Base Number:
- Washer - Thrust#6 tabs - (1) regd. for all forward planet Carrier assy. (2) reqd. for all 3 pinion gear reverse planet carrier assy.
- Callout Name:7A166
- Callout Name:
- BEARING ASY. /WASHER (PLANET CARRIER THRUST) 3 PINION PLANET THRUST WASHERS - 3 TABS
Washer - thrust - plain style - 3 tabs (15.0-15.5mm) - located between 7B067 and 7A398 - used with 3 pnion planetaries- Base Number:7A166
- Callout Name:7A166
- Base Number:
- Located on both sides of 7D006 - 3 tabs (15.0-15.5mm) - used with 3 pinion planetaries
- Require Quantity:2
- Package Quantity:2
- Base Number:7A166
- Callout Name:7A166
- Require Quantity:
- BEARING ASY. /WASHER (PLANET CARRIER THRUST) 4 PINION PLANET THRUST WASHERS - 4 TABS
Washer - thrust - plain style - located at between 7B067 and 7A398 - used with 4 pinion planetaries- Base Number:7A166
- Callout Name:7A166
- Base Number:
- Located on both sides of 7D006 planet - used with 4 pinion planetaries
- Require Quantity:2
- Package Quantity:1
- Base Number:7A166
- Callout Name:7A166
- Require Quantity:
Washer - Thrust3 51/64" OD - 2 13/16" ID - 4 tabs- Base Number:7C096
- Callout Name:7C096
- Base Number:
- Bearing Assy - Thrust#4 thrust
- Callout Name:7C096
- Replaced By:3L3Z-7C096-AA
- Callout Name:
- BUSHING (CASE)
Rear - bushing- Location:Rear
- Callout Name:7025
- Replaced By:F5TZ-7025-A
- Location:
- CASE ASY.
(AB-187-KB) bolt (case to engine) - M10-1.50 x 65 (metric)- Callout Name:7005
- Replaced By:-W710658-S439
- Callout Name:
Bolt (case to engine) M10 - 1.50 x 75 (metric)- Callout Name:7005
- Replaced By:-N606067-S439
- Callout Name:
(P-12) plue (reqd. to plug front pump, direct cl., forward & throttle valve-pressure holes in case-dry seal - 1/8"-27- Base Number:87650-S
- Callout Name:7005
- Base Number:
- (P-12) - plug (dry seal) - 1/8" - 27
- Require Quantity:2
- Package Quantity:1
- Base Number:87650-S
- Callout Name:7005
- Require Quantity:
- CLUTCH ASY. (ONE-WAY)
Low one-way clutch, BEFORE 5/1/97
One piece - design over/run clutch - use w/F3TZ 7B067-A hub only - Note: 377135-5 not reqd. w/F3TZ 7A089-A cl. assy.- Base Number:7A089
- Callout Name:7A089
- Base Number:
- Clutch Assy
- Base Number:7A089
- Callout Name:7A089
- Base Number:
- CONVERTER ASY.
#M,O,U, 5.0L
#M,O,U, 5.8L- Callout Name:7902
- Replaced By:F7TZ-7902-FARM
- Callout Name:
- (P-12) plug - dry seal tapered thread - 1/8" - 27
- Base Number:87650-S
- Callout Name:7902
- Base Number:
CylinderSteel stamp cylinder assy.- Callout Name:7F283
- Replaced By:F6AZ-7F283-AA
- Callout Name:
Drum Assy - Reverse Clutch8 plate clutch assembly - when replacing a production only 6-plate clutch cylinder, one additional 7B164 friction disc and 7B442 steel plate must be used.- Callout Name:7D044
- Callout Name:
GasketGasket not included in 7153 kit- Base Number:7A136
- Callout Name:7A136
- Base Number:
Ring Gear- Callout Name:7A019
- Replaced By:4L3Z-7D234-AA
- Callout Name:
Gear1/2" hub thickness - one groove on hub surface - 4 19/32 O.D. - 14 - 36 teeth - incl. (1) D3TZ 7B368-A washer- Callout Name:7A233
- Callout Name:
- GEAR (RING)
- Gear - outputshaft ring - 1 11/16" wide - 74 internal teeth,
- Base Number:7A153
- Callout Name:7A153
- Base Number:
- Kit - overdrive ring gear - includes (1) F5TZ 7G375-AA and (1) F6TZ 7G375-AA snap ring - Used with stamped steel Overdrive clutch drum 7G387, Use with stamped steel overdrive cylinder only,
- Base Number:7A153
- Callout Name:7A153
- Base Number:
GearBEFORE 10/28/98- Callout Name:7A399
- Replaced By:4L3Z-7D234-AA
- Callout Name:
Hub - Clutch#EOAP 7F236-AB or AC- Callout Name:7F236
- Replaced By:EOAZ-7F236-A
- Callout Name:
- HUB (OUTPUT SHAFT)
Hub only - used with E9TZ 7D171-AA and E6DZ 7G178-A- Callout Name:7D164
- Replaced By:F81Z-7D164-AA
- Callout Name:
(QQ-16-EA) ring 7D164 to 7060 retaining 1 1/2" dia.- Base Number:387031-S5
- Callout Name:7D164
- Base Number:
- Retainer(QQ-94-A) ring (7B067 to 7D392) retaining 4 17/32" I.D. - 1/16" thick
- Base Number:377132-S
- Callout Name:7B067
- Base Number:
- PISTON (INTERM. CLUTCH)
- Kit - includes piston, retainer and spring assembly.,
- Base Number:7E005
- Callout Name:7E005
- Base Number:
- PISTON ASY. (CLUTCH)
#D6AP 7A258-AA or AB
Use in forward clutch - D6AP 7A258-AA, AB- Base Number:7A262
- Callout Name:7A262
- Base Number:
- PISTON ASY. (REVERSE CLUTCH)
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) COAST CLUTCH
External steel- Require Quantity:2
- Package Quantity:1
- Callout Name:7B164
- Require Quantity:
- Driven Plate - SteelExternal - steel
- Base Number:7B442
- Callout Name:7B164
- Base Number:
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) DIRECT CLUTCHExternal - steel - 1/16" thick - 5.00" O.D. - 34 teeth
- Callout Name:7B164
- Callout Name:
- External steel
- Require Quantity:4
- Package Quantity:4
- Base Number:7B442
- Callout Name:7B164
- Require Quantity:
- Internal friction
- Require Quantity:4
- Package Quantity:1
- Callout Name:7B164
- Require Quantity:
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) FORWARD CLUTCH
- Internal friction
- Require Quantity:4
- Package Quantity:4
- Base Number:7B164
- Callout Name:7B164
- Require Quantity:
- Plate Assy - DriveInternal - friction
- Base Number:7B164
- Callout Name:7B164
- Base Number:
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) INTERMEDIATE CLUTCH
Plate - steel - .078" , All except tag#'s beginning with F8- Require Quantity:2
- Package Quantity:1
- Callout Name:7B164
- Require Quantity:
- Plate -friction
- Require Quantity:3
- Package Quantity:1
- Callout Name:7B164
- Require Quantity:
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) OVERDRIVE CLUTCHExternal steel
- Require Quantity:2
- Package Quantity:2
- Base Number:7B442
- Callout Name:7B164
- Require Quantity:
- Internal friction
- Require Quantity:2
- Package Quantity:1
- Callout Name:7B164
- Require Quantity:
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) REVERSE CLUTCHExternal - steel
External steel- Base Number:7B442
- Callout Name:7B164
- Base Number:
- Internal - friction - cream color lining
Internal friction, BEFORE 5/1/97- Callout Name:7B164
- Callout Name:
- PLATE (CLUTCH PRESSURE)Forward clutch front - triangle depression on face of plate
- Base Number:7B066A
- Callout Name:7B066
- Base Number:
- 11/32" thick - 5 1/8" I.D. - 26 teeth
Direct drive clutch, forward clutch rear- Base Number:7B066
- Callout Name:7B066
- Base Number:
- (QQ-98-B) - 7" O.D. - .094" thick, retaining ring - 7B066 to cyl.
- Base Number:377444-S
- Callout Name:7B066
- Base Number:
Spacer1/4" thk. - 5 27/32" I.D. - 60 teeth- Callout Name:7B066
- Callout Name:
- PLATE (CLUTCH PRESSURE) DIRECT CLUTCH
.219" thick - 34 teeth 3 21/32" ID x 5.00" OD 12 - plate clutch- Base Number:7B066
- Callout Name:7B066
- Base Number:
- (QQ-98B) 7" O.D. - .094" thick, retaining ring 7B066 to 7A360
(QQ-98B) 7" O.D. - .094" thick, retaining ring 7B066 to 7D044- Base Number:377444-S
- Callout Name:7B066
- Base Number:
- PLATE (CLUTCH PRESSURE) FORWARD CLUTCHFront - 19/64" thick - 5 1/8" I.d. - 26 teeth
- Location:Front
- Base Number:7B066A
- Callout Name:7B066
- Location:
- Rear - 11/32" thick - 5 1/8" I.D. - 26 teeth
- Location:Rear
- Base Number:7B066
- Callout Name:7B066
- Location:
.118 tooth thickness - 5.640/5.630 OD - use w/10 plate forward clutch- Base Number:7B066
- Callout Name:7B066
- Base Number:
- PLATE (CLUTCH PRESSURE) INTERMEDIATE CLUTCHApply side - 3.13-3.23mm Thick - 157.2-157.8mm I.D. - 26 teeth in a 30 tooth profile
- Base Number:7B066A
- Callout Name:7B066
- Base Number:
- Pressure - .250/.260" thick at snap ring surface
- Callout Name:7B066
- Replaced By:3L3Z-7B066-BA
- Callout Name:
- Rear plate - 8.15-8.41mm thick - 158.2-158.8mm I.D. - 30 teeth no groove on O.D. of teeth, 5.8L
- Callout Name:7B066
- Callout Name:
- Rear plate - 37/64" thick - 6 1/4" I.D. - 30 teeth no groove on O.D. of teeth, 4.9L,5.0L
- Callout Name:7B066
- Callout Name:
- PLATE (CLUTCH PRESSURE) REVERSE CLUTCH
- Rear plate - .200" thick, measured at spline area
- Callout Name:7B066
- Callout Name:
- Front plate - 5 33/64" O.D. - 34 teeth
- Base Number:7B066A
- Callout Name:7B066
- Base Number:
- PUMP ASY. (FRONT FLUID)
(AB-91-E) bolt (7A103 to 7005) M8 x 1.25 x 65 hex head (metric)- Require Quantity:9
- Package Quantity:4
- Base Number:HS1
- Callout Name:7A103
- Require Quantity:
- RETAINER (CLUTCH DISC SPRING)
- RETAINER (CLUTCH PISTON SPRING)
- RETAINER AND SPRING ASY. (DIRECT CLUTCH)
- RETAINER and SPRINGS (OVERRUNNING CLUTCH)
Use with stamped 7D044 drum - Will not work with F8AZ 7D044-AA drum, must use F8AZ 7A089-AA- Base Number:7D191
- Callout Name:7D191
- Base Number:
Ring3 7/16" I.D. X 3 11/16" O.D.- Base Number:7D256
- Callout Name:7D256
- Base Number:
- SEAL (CLUTCH CYLINDER)
1 1/4" I.D. - short flair lip seal - direct clutch piston inner- Base Number:7C099
- Callout Name:7C099
- Base Number:
2 1/2" O.D. - short lip seal - forward clutch piston inner- Base Number:7C099
- Callout Name:7C099
- Base Number:
- SEAL (CLUTCH PISTON FLUID)
- SEAL (CLUTCH PISTON FLUID) COAST CLUTCH
- SEAL (CLUTCH PISTON FLUID) DIRECT CLUTCH
- SealOuter (large) 7 3/4" O.D. flair lip seal refer to group 7F225 for inner seal
- Callout Name:7A548
- Callout Name:
SealRequired For EPC Solenoid- Require Quantity:2
- Package Quantity:10
- Base Number:7Z101
- Callout Name:7Z101
- Require Quantity:
Seal- Require Quantity:2
- Package Quantity:2
- Callout Name:7D019
- Replaced By:F4AZ-7D019-AA
- Require Quantity:
SealSeal - scarf cut service seal to replace solid production seal which is not serviced- Base Number:7052
- Callout Name:7B497
- Base Number:
SealInner - 6 17/32" O.D. - short lip seal- Base Number:7F225
- Callout Name:7F225
- Base Number:
- SealIntermediate clutch piston - Overdrive clutch piston - flair lip seal - 6 31/64" OD x 6.00" ID
- Base Number:7F225
- Callout Name:7F225
- Base Number:
SealOuter - flair lip seal - 8 13/32" OD x 7 29/32" ID- Base Number:7F224
- Callout Name:7F224
- Base Number:
Seal - Output Shaft Oil1 3/4" O.D. - cast iron seal ring- Require Quantity:3
- Package Quantity:4
- Base Number:7F225
- Callout Name:7F273
- Require Quantity:
- SealTEFLON - REPLACES CAST IRON RING
- Require Quantity:2
- Package Quantity:1
- Base Number:7F274
- Callout Name:7F274
- Require Quantity:
Seal- Require Quantity:2
- Package Quantity:2
- Base Number:7D020
- Callout Name:7D020
- Require Quantity:
Seal3 3/16" I.D. x 3 1/2" O.D.- Callout Name:7D404
- Callout Name:
- SealBLUE DYE - 5 5/64" O.D. X 4 5/8" I.D.
- Base Number:7D403
- Callout Name:7D403
- Base Number:
- SEAL ASY. (FRONT FLUID PUMP)
O-RING - PUMP OUTER SEAL - 9 33/64" O.D. - GREEN, YELLOW OR ORANGE STRIPE- Callout Name:7A248
- Replaced By:2L3Z-7A248-AA
- Callout Name:
- Small - 2" I.D. x 2 3/4" O.D.
- Callout Name:7A248
- Replaced By:F2VY-7A248-A
- Callout Name:
Sensor - Output Shaft Speed#F4AP 7H103-AA- Base Number:7H103
- Callout Name:7H103
- Base Number:
- Shaft - Intermediate
- Callout Name:7F351
- Replaced By:F8AZ-7F351-AA
- Callout Name:
- SHAFT ASY. (OUTPUT)Copper flash plate (QQ-16-EA) ring - 5/64" thick - 1 11/32" I.D. - (retains 7D164 to 7060)
- Base Number:387031-S5
- Callout Name:7060
- Base Number:
- 14 9/32" long - cup plug in end of shaft, 4X4
- Callout Name:7060
- Replaced By:F81Z-7060-BA
- Callout Name:
- #3 grooves - 20.00" long - 7 tooth speedo - cup plug in end of shaft, 4x2
- Callout Name:7060
- Callout Name:
- #No grooves - 20.00" long - 8 tooth speedo - cup plug in end of shaft, 4x2
- Callout Name:7060
- Callout Name:
23 3/16" long - 25 - 34 - 36 teeth - 31 splines - 8 tooth speedo. gear rolled on shaft , 2/W/D- Callout Name:7060
- Callout Name:
- 15" long - 7 tooth speedo-gear - without o-ring groove
- Base Number:7060
- Callout Name:7060
- Base Number:
- #No grooves - 20" long - no speedo gear - cup plug in end of shaft, 4x2
- Callout Name:7060
- Replaced By:F81Z-7060-AA
- Callout Name:
- 20.00" long - 7 tooth speedo gear rolled on shaft. Note speedo gear not used on 1992 - bushing in end of shaft - Refer to Note, 2/W/D
- Base Number:7060
- Callout Name:7060
- Base Number:
- 14 9/32" long - bushing in end of shaft - Refer to Note, 4/W/D
- Base Number:7060
- Callout Name:7060
- Base Number:
RetainerREVERSE CLUTCH - WAVE RETAINING RING - 5 37/64" O.D.- Base Number:7A577
- Callout Name:7A577
- Base Number:
- SNAP RING (CLUTCH PRESSURE PLATE RETAINER) DIRECT CLUTCH
.052" thick - use w/steel stamp cylinder- Base Number:7D483
- Callout Name:7D483
- Base Number:
- .066" thick - use w/steel stamp cylinder
- Base Number:7D483
- Callout Name:7D483
- Base Number:
- .080" thick - use w/steel stamp cylinder
- Base Number:7D483
- Callout Name:7D483
- Base Number:
- .094" thick - use w/steel stamp cylinder
- Base Number:7D483
- Callout Name:7D483
- Base Number:
- SNAP RING (CLUTCH PRESSURE PLATE RETAINER) FORWARD CLUTCHLtr. "D" Stamp - .062" thick - 5 11/16" O.D.
- Callout Name:7D483
- Replaced By:5L3Z-7D483-A
- Callout Name:
- Ltr. "C" stamp - .076" thick - 5 11/16" O.D.
- Callout Name:7D483
- Replaced By:5L3Z-7D483-B
- Callout Name:
- Ltr. "B" stamp - .090" thick - 5 11/16" O.D.
- Callout Name:7D483
- Replaced By:5L3Z-7D483-C
- Callout Name:
- Ltr. "A" stamp - .104" thick - 5 11/16" O.D.
- Callout Name:7D483
- Replaced By:5L3Z-7D483-D
- Callout Name:
- SNAP RING (CLUTCH PRESSURE PLATE RETAINER) REVERSE CLUTCH
- SNAP RING (CLUTCH PRESSURE PLATE RETAINING) - SELECTIVE FIT COAST CLUTCH
- SNAP RING (CLUTCH PRESSURE PLATE RETAINING) - SELECTIVE FIT OVERDRIVE CLUTCH
RingRetain 7F235 to 7D044- Base Number:7C122
- Callout Name:7C122
- Base Number:
- Snap Ring
- Base Number:7C122
- Callout Name:7C122
- Base Number:
Spring5" O.D.- Base Number:7B070
- Callout Name:7B070
- Base Number:
- SPRING (CLUTCH PISTON DISC) FORWARD CLUTCH
- Spring
- Base Number:7B070
- Callout Name:7B070
- Base Number:
- Spring
- Base Number:7B070
- Callout Name:7B070
- Base Number:
SpringForward clutch- Base Number:7E085
- Callout Name:7E085
- Base Number:
- Spring - Piston Return
- Base Number:7B070
- Callout Name:7B070
- Base Number:
- SUPPORT ASY. (CENTER)
Support - center - bearing-style - must be used with F4TZ 7017-D input shaft and F4TZ 7B446-A overdrive planetary only.- Base Number:7A130
- Callout Name:7A130
- Base Number:
- Kit - includes center support, center shaft, #5 thrust bearing, orificed cup plug and I.S. - See TSB 94-24-15
- Base Number:7A130
- Callout Name:7A130
- Base Number:
- SUPPORT ASY. (FRONT PUMP)
Bolt (7A108 to 7A103) hex - head - M8 - 1.25 x 25 (Metric)- Require Quantity:5
- Package Quantity:1
- Callout Name:7A108
- Replaced By:-N605787-S1000
- Require Quantity:
- Ring(QQ-115-C)RING, RETAINING - 7-7/32" - RETAINS (7A130 TO 7005)
- Base Number:388501-S
- Callout Name:7A130
- Base Number:
- WASHER (#1 THRUST) SELECTIVE FIT
- WASHER (FRONT PUMP SUPPORT THRUST)
Genuine Ford Parts, the Right Choice
FordPartsGiant.com offers the lowest prices for genuine 1994 Ford F-150 parts. Parts like Internal Parts-Clutches, Gears, Shafts, Governor & Related Parts are shipped directly from authorized Ford dealers and backed by the manufacturer's warranty. Parts fit for the following vehicle options.
Our Customers Reviews
Award Winning Customer Service