My Cart
My Vehicle Change Vehicle
1992 Mercury Grand Marquis
8 Cyl 4.6L; 4-Speed Automatic Transmission AODE
My Vehicle Change Vehicle
1992 Mercury Grand Marquis
8 Cyl 4.6L; 4-Speed Automatic Transmission AODE
Categories Close X
You have selected
Automatic Transmission
Other Categories
Accelerator Linkage, Air Cleaner & Speed Control
Air Conditioner, Radios & Shock Absorbers
Alternator, Regulator, Battery, Starter & Distributor
Body Front & Floor
Body Sides & Quarter
EM Exterior Moulding
Engine
Fenders & Hood
Frame, Exhaust System, Spring & Stabilizer
Front Suspension & Steering
Fuel System & Manifolds
IT Interior Trim Parts
Lamps & Wiring
Radiator & Grill
Rear Axle & Drive Shaft
Roof, Back, Luggage Compartment & Tailgate
SM Body Sheet metal
Seats
Speedometer, Bumpers, Mirrors & Wipers
Wheels & Brakes
Parts Questions
Clutches, Gear, Shaft & Related Parts fit your 1992 Mercury Grand Marquis 8 Cyl 4.6L 4AT AODE 8 Cyl 4.6L 4-Speed Automatic Transmission AODE
Sort by:
Recommended
Part No.
Part Description
Retail
Price
Price
Your
Price
Price
Qty.
Part No. &
Part Description
Part Description
- CASE ASY.
BoltBolt (case to engine) M10 - 1.50 x 75 (metric)- Callout Name:7005
- Replaced By:-N606067-S439
$15.30$8.874 - Callout Name:
Bolt(AB-187-KB) bolt (case to engine) - M10-1.50 x 65 (metric)- Callout Name:7005
- Replaced By:-W710658-S439
$13.50$7.834- Callout Name:
Plug - Blanking - Threaded(P-12) plue (reqd. to plug front pump, direct cl., forward & throttle valve-pressure holes in case-dry seal - 1/8"-27
(P-12)-plug (reqd. to plug front pump, direct cl., forward. & throttle valve-pressure holes in case-dry seal-1/8"-27- Base Number:87650-S
- Callout Name:7005
--$0.00- Base Number:
Stud(AW-91-BM) Stud and washer (case to engine) M6-1.0 x M8-1.25 x 50mm (metric)- Callout Name:7005
--$0.00- Callout Name:
SPRING (REVERSE CLUTCH PISTON)Spring - Piston Return- Base Number:7B070
- Callout Name:7B070
$15.95$11.101- Base Number:
- GASKET (FRONT FLUID PUMP TO CASE)
SENSOR (OUTPUT SHAFT SPEED)Sensor - Output Shaft Speed#F4AP 7H103,AA- Base Number:7H103
- Callout Name:7H103
$62.58$39.58- Base Number:
- BAND ASY. (REVERSE CLUTCH)
- CLUTCH ASY. (ONE-WAY)
HUB (DIRECT CLUTCH)Hub - Clutch#EOAP 7F236-AB or AC- Callout Name:7F236
- Replaced By:EOAZ-7F236-A
$28.48$19.821- Callout Name:
- SPRING (PRESSURE)Spring21 teeth , See Note 2
SPRING (WAVE PLATE)- Callout Name:7E085
$13.45$9.681 - Callout Name:
- SEAL ASY. (FRONT FLUID PUMP)
SealO-ring - pump outer seal - 9 33/64" O.D. - green, yellow or orange stripe- Callout Name:7A248
- Replaced By:2L3Z-7A248-AA
$8.33$5.801- Callout Name:
HUB (OUTPUT SHAFT)Ring(Q-6-G)-ring (7D164 to 7060) retaining 1 13/16"- Base Number:97713-S
- Callout Name:7D164
$7.00$4.062- Base Number:
- SEAL (CLUTCH CYLINDER)Seal#EOAP 7F234-AA LONG FLAIR LIP SEAL - DIRECT CLUTCH PISTON INNER
- Callout Name:7C099
- Replaced By:F3AZ-7C099-A
$3.03$1.943 - Callout Name:
Seal1 1/4" I.D. - short flair lip seal - direct clutch piston inner- Base Number:7C099
- Callout Name:7C099
$3.03$1.943- Base Number:
Seal2 1/2" O.D. - short lip seal - forward clutch piston inner- Base Number:7C099
- Callout Name:7C099
$7.45$4.761- Base Number:
BEARING ASY. (DIRECT CLUTCH INNER)Bearing#7 thrust
Use between 7F283 cyl. & 7A398 planet 2 1/8" O.D. -#7 thrust bearing- Callout Name:7F243
- Replaced By:3L3Z-7F243-AA
$28.73$18.011- Callout Name:
BEARING ASY. (DIRECT CLUTCH OUTER)Bearing#8 thrust
Located between 7F283 cyl. & 7D164 hub - double race bearing use w/F1AZ 7D164-A hub w/ridge on flange surface opposite hub - #8 thrust bearing- Base Number:7F240
- Callout Name:7F240
$22.00$13.791- Base Number:
- PLATE (CLUTCH PRESSURE) REVERSE CLUTCH
Plate - Clutch PressureFront plate - 5 33/64" O.D. - 34 teeth- Base Number:7B066A
- Callout Name:7B066
$18.00$12.531 - Base Number:
- Plate - Clutch PressureRear plate - .200" thick, measured at spline area, Use with 4 plate clutch
- Callout Name:7B066
--$0.00 - Callout Name:
SEAL (INPUT SHAFT)SealSeal - scarf cut service seal to replace solid production seal which is not serviced- Require Quantity:2
- Package Quantity:2
- Base Number:7052
- Callout Name:7B497
$3.67$2.342- Require Quantity:
PLATE (CLUTCH PRESSURE) FORWARD CLUTCHPlate - Clutch Pressure.118 tooth thickness - 5.640/5.630 OD - use w/10 plate forward clutch
.118" tooth thickness - 5.640/5.630 OD - use w/10 plate fwd. cl. - See Note 2- Base Number:7B066
- Callout Name:7B066
$20.50$14.021- Base Number:
- SNAP RING (CLUTCH PRESSURE PLATE RETAINER) FORWARD CLUTCH
Snap RingLtr. "C" stamp - .076" thick - 5 11/16" O.D.
Ltr. "C" stamp - .076" thick - 5 11/16" O.D. - See Note 2- Callout Name:7D483
- Replaced By:5L3Z-7D483-B
$24.64$15.451 - Callout Name:
Snap RingLtr. "B" stamp - .090" thick - 5 11/16" O.D.
Ltr. "B" stamp - .090" thick - 5 11/16" O.D. - See note 2- Callout Name:7D483
- Replaced By:5L3Z-7D483-C
$10.36$6.611- Callout Name:
- Snap RingLtr. "A" stamp - .104" thick - 5 11/16" O.D.
Ltr. "A" stamp - .104" thick - 5 11/16" O.D. - See Note 2- Callout Name:7D483
- Replaced By:5L3Z-7D483-D
$11.02$7.031 - Callout Name:
- RetainerLtr. "D" Stamp - .062" thick - 5 11/16" O.D.
Ltr. "D" stamp - .062" thick - 5 11/16" O.D. - See note 2- Callout Name:7D483
- Replaced By:5L3Z-7D483-A
$26.27$16.761 - Callout Name:
DRUM ASY. (REVERSE CLUTCH)Drum Assy - Intermediate#No grooves on lugs , 7 plate clutch pack , cast iron drum- Callout Name:7D044
--$0.00- Callout Name:
- PUMP ASY. (FRONT FLUID)
- RETAINER (CLUTCH PISTON SPRING)
- RETAINER & SPRING ASY. (DIRECT CLUTCH)
- BODY ASY. (GOVERNOR)
SUPPORT ASY. (PLANETARY GEARS)Ring(QQ-115-C)Ring, retaining - 7-7/32" - retains (7A130 to 7005)- Base Number:388501-S
- Callout Name:7A130
$13.50$7.834- Base Number:
- RETAINER (OVERRUNNING CLUTCH)
Ring - Retaining(QQ-92-K)-ring (7D191 to 7D044) retaining 3 21/64"- Callout Name:7D191
- Replaced By:-391267-S
$2.50$1.454 - Callout Name:
- SNAP RING (CLUTCH PRESSURE PLATE RETAINER) REVERSE CLUTCH
- WASHER (FORWARD CLUTCH THRUST)
SEAL (OUTPUT SHAFT TO CASE)Seal - Output Shaft Oil1 3/4" O.D. - cast iron seal ring- Require Quantity:4
- Package Quantity:4
- Base Number:7F225
- Callout Name:7F273
$5.36$3.424- Require Quantity:
PLATE (CLUTCH PRESSURE) DIRECT CLUTCHPlate - Clutch Pressure.219" thick - 34 teeth 3 21/32" ID x 5.00" OD 12 - plate clutch- Base Number:7B066
- Callout Name:7B066
$20.67$14.381- Base Number:
- SUPPORT ASY. (FRONT PUMP)
- SPRING (FORWARD CLUTCH RETURN)
- SEAL (CLUTCH PISTON FLUID)
SealFORWARD CLUTCH - OUTER - EOAP 7F227-AA - 4 25/32" I.D. - FLAIR LIP SEAL- Callout Name:7A548
- Replaced By:F3LY-7A548-A
$10.60$6.761 - Callout Name:
- SealDIRECT CLUTCH - OUTER - #EOAP 7C000-AA - 4 7/32" I.D. - LONG FLAIR LIP SEAL
- Callout Name:7A548
- Replaced By:F3AZ-7A548-A
$5.50$3.503 - Callout Name:
SNAP RING (CLUTCH PRESSURE PLATE RETAINER)RetainerReverse clutch - wave retaining ring - 5 37/64" O.D.- Base Number:7A577
- Callout Name:7A577
$8.67$5.532- Base Number:
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) FORWARD CLUTCH
Plate Assy - DriveFriction - #1/16" thick
Internal - friction
Internal - friction - 1/16" thick- Base Number:7B164
- Callout Name:7B164
$8.03$5.595 - Base Number:
Driven Plate - Steel34 teeth - .0665 thick - 5.640/5.630 O.D.
34 teeth - .0665" thick - 5.640/5.630" O.D. - See Note 2 - plate not part of 7C391 Kit - order plate separately- Base Number:7B442
- Callout Name:7B164
$6.10$4.255- Base Number:
BEARING ASY./WASHER (THRUST)Bearing Assy - Thrust#4 thrust
Forward clutch hub to rev. clutch gear #4- Callout Name:7C096
- Replaced By:3L3Z-7C096-AA
$15.56$9.931- Callout Name:
- WASHER (FRONT SUPPORT THRUST)
Washer - Thrust#1 & green - .052" thick- Base Number:7D014
- Callout Name:7D014
$13.49$8.611 - Base Number:
- Washer - Thrust#2 - yellow - .070" thick
- Base Number:7D014
- Callout Name:7D014
$11.07$7.061 - Base Number:
- Washer - Thrust#3 - natural - .087" thick
- Base Number:7D014
- Callout Name:7D014
$11.20$7.151 - Base Number:
RING (REVERSE CLUTCH PISTON SPRING PRESSURE)Ring3 7/16" I.D. x 3 11/16" O.D.- Base Number:7D256
- Callout Name:7D256
$10.61$7.393- Base Number:
SEAL (REVERSE CLUTCH PISTON-OUTER)SealBlue dye - 5 5/64" O.D. x 4 5/8" I.D.- Base Number:7D403
- Callout Name:7D403
$4.22$2.693- Base Number:
- BAND ASY. (OVERDRIVE)
BEARING ASY. (FORWARD CLUTCH HUB FRONT)Washer - Thrust#3 Thrust
2 1/8" O.D. x 1 23/64" I.D. - use between 7F207 cyl. & 7B067 hub- Callout Name:7F231
- Replaced By:3L3Z-7F231-AA
$13.29$8.481- Callout Name:
WASHER (DIRECT CLUTCH INNER BRG.)Support1 7/8" O.D. x 1/8" thick - use between 7F283 cyl. & 7F243 bearing- Callout Name:7F237
- Replaced By:F4AZ-7F237-A
$32.36$20.291- Callout Name:
- CYLINDER ASY. (DIRECT CLUTCH)
CylinderSteel stamp cylinder assy.- Callout Name:7F283
- Replaced By:F6AZ-7F283-AA
$425.00$231.411 - Callout Name:
- Cylinder12 plate cyl. assy. - cast iron cyl. - See Note: 1
4.6L- Callout Name:7F283
--$0.00 - Callout Name:
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) REVERSE CLUTCHDriven Plate - SteelExternal steel - use w/steel stamp 7D044 only
- Base Number:7B442
- Callout Name:7B164
$9.39$6.533 - Base Number:
- CONVERTER ASY.Plug - Blanking - Threaded(P-12)-plug (converter drain -plug )-1/8"-27
- Base Number:87650-S
- Callout Name:7902
--$0.00 - Base Number:
- SEAL (OUTPUT SHAFT TO DIRECT CLUTCH CYL.)SealTeflon - replaces cast iron ring
- Require Quantity:2
- Package Quantity:1
- Base Number:7F274
- Callout Name:7F274
--$0.00 - Require Quantity:
- GASKET AND OIL SEAL KIT (OVERHAUL)
- Kit - GasketKit does not include 7D100 & 7C155 gaskets. Must order gaskets separately.
- Callout Name:7153
--$0.00 - Callout Name:
SCREEN (GOVERNOR FLUID)Screen AssyREQD. IN 7C063 GOV. ASSY. REQD. IN 7005 CASE ASSY.
Used in oil passage in case- Require Quantity:2
- Package Quantity:1
- Base Number:7E242
- Callout Name:7E242
--$0.00- Require Quantity:
- SHAFT (OUTPUT)Shaft Assy - Output28,43 splines , 15" long , 7 tooth gear
- Callout Name:7060
--$0.00 - Callout Name:
- PLATE (CLUTCH INTERNAL AND EXTERNAL SPLINE) DIRECT CLUTCHDriven Plate - SteelEXTERNAL - STEEL - 1/16" THICK - 5.00" O.D. - 34 TEETH - USE W/STEEL STAMP - DIRECT CLUTCH CYLINDER PLATE NOT PART OF 7C391 KIT - ORDER PLATE SEPARATELY
External - steel - 1/16" thick - 5.00" O.D. - 34 teeth - use w/steel stamp - direct clutch cylinder- Callout Name:7B164
--$0.00 - Callout Name:
SEAL (REVERSE CLUTCH CYLINDER)Seal- Require Quantity:2
- Package Quantity:2
- Base Number:7D020
- Callout Name:7D020
$6.78$4.33- Require Quantity:
- SEAL (INTERM. CLUTCH PISTON - OUTER)
- SEAL (INTERMEDIATE CLUTCH PISTON - INNER)SealINNER - 6 17/32" O.D. - FLAIR LIP SEAL
- Callout Name:7F225
- Replaced By:F3LY-7F225-A
--$0.00 - Callout Name:
SEAL (EPC SOLENOID)SealRequired for EPC solenoid- Require Quantity:2
- Package Quantity:10
- Base Number:7Z101
- Callout Name:7Z101
$1.76$1.13- Require Quantity:
- PLATE (CLUTCH PRESSURE) INTERMEDIATE CLUTCHPlate - Clutch Pressure13/32" thick , 5 55/64" I.D. x 7 29/64" O.D.
- Callout Name:7B066
--$0.00 - Callout Name:
PISTON (INTERM. CLUTCH)Piston - Intermediate ClutchKit , includes piston, retainer and spring assembly.- Base Number:7F222
- Callout Name:7E005
--$0.00- Base Number:
- GEAR & SHELL ASY. (REVERSE CLUTCH)Ring GearGEAR & SHELL ASY. (REVERSE CLUTCH)
- Callout Name:7A019
--$0.00 - Callout Name:
Genuine Ford Parts, the Right Choice
FordPartsGiant.com offers the wholesale prices for genuine 1992 Mercury Grand Marquis parts. Parts like Clutches, Gear, Shaft & Related Parts are shipped directly from authorized Ford dealers and backed by the manufacturer's warranty. Parts fit for the following vehicle options.