My Garage
My Account
Cart
Cylinder Block Cylinder Head, Valves And Related Parts fit your 1980 Ford E-250 8 Cyl 7.5L 3-Speed Manual Transmission
Currently shopping for
1980 Ford E-250
Change VehicleVehicle Options
8 Cyl 7.5L; 3-Speed Manual TransmissionVehicle Options
8 Cyl 7.5L; 3-Speed Manual TransmissionCategories Close X
Currently selected
Engine
- Camshaft, Gear Bearings And Related Parts
- Crankcase Ventilation System 1980/87 - Exc. E.F.I.
- Cylinder Block - External Parts
- Cylinder Block - Internal Parts
- Cylinder Block Cylinder Head, Valves And Related Parts
- Cylinder Block Emission Reduction
- Cylinder Block Engine Assy.
- Cylinder Block Engine Block Immersion Heater
- Engine Supports - 1980/ (Front And Rear)-E250/350
- Engine Supports - 1983/ (Front And Rear)- F250/350, F(Super Duty)-2/W/D
- Engine Supports - F250/350, F(Super Duty)-2/W/D 1983/84 (Front And Rear)- F250/350-4/W/D
- Engine Supports - F250/350-4/W/D 1989 (Front And Rear)- F53-Stripped Chassis
- Oil Cooler Oil Cooler And Oil Level Indicator F53-Stripped Chassis
- Oil Filler Pipe Installation 1980/87-E100/350
- Oil Filler Pipe Installation 1989 -F53-Stripped Chassis
- Oil Filter (Spin-On Type) And Related Parts
- Oil Filter (Spin-On Type) And Related Parts Oil Pump And Related Parts
- Oil Filter (Spin-On Type) And Related Parts Piston, Connecting Rod And Related Parts
- Oil Filter (Spin-On Type) And Related Parts Valves, Push Rods, Rocker Arm Cover
- Related Parts Crankshaft, Flywheel And Related Parts
Other Categories
Accelerator Linkage, Air Cleaner & Speed Control
Air Conditioner, Radio & Shock Absorbers
Alternator, Battery, Distributor & Starter
BODY Body
Fenders & Hood
Frame, Exhaust System & Springs
Front Axle & Steering
Fuel System & Manifolds
Lamps & Wiring
Manual Transmission
Radiator & Grill
Rear Axle, Drive & Coupling Shafts
Speedometer, Bumpers, Mirrors & Wipers
Wheels & Brakes
Parts Questions
Sort by:
Recommended
Part No. & Part Description
Price & Qty.
Part No. &
Part Description
Part Description
- BOLT (CYLINDER HEAD)
C2OZ-6065-B
Bolt - Cylinder Head- 7/16"-14 x 3 15/16"
7/16"-14 x 3 29/32" - Require Quantity: 14
- Package Quantity: 10
- Callout Name: 6065
- Replaced By: F3ZZ-6065-B
$8.38 $5.8910 - 7/16"-14 x 3 15/16"
C8SZ-6065-B
Bolt - Hex.Head- 9/16"-12 x 4 3/8"
- Require Quantity: 10
- Package Quantity: 4
- Base Number: 6065
- Callout Name: 6065
$36.67 $25.744- C8SZ-6065-A
Bolt - Hex.Head- "Before 2/2/87" , 9/16"-12 x 5 1/8" r/b E7TZ-B
- Require Quantity: 10
- Package Quantity: 4
- Callout Name: 6065
- Replaced By: E7TZ-6065-B
$27.32 $19.184 
C9OZ-6065-B
Bolt - Hex.Head- Long bolts-1/2'-13x4'
- Require Quantity: 10
- Package Quantity: 1
- Callout Name: 6065
- MANIFOLD (EXHAUST)
-390530-S2
Bolt-3/8-16 X 1.25 Hex Flange- (BB-416BF) BOLT - 3/8 - 16 x 1.25. Attach exhaust manifolds to cylinder heads.
- Require Quantity: 12
- Package Quantity: 2
- Base Number: 390530-S2
- Callout Name: 9430
$9.66 $5.65 
-374047-S
Bolt - Hex.Head - Self-Locking- (BB-869-D)-screw & lockwasher assy. (exh. manifold to cyl head) hex. head 3/8" -16 x 1 5/16" , STANDARD PART
- Require Quantity: 14
- Package Quantity: 1
- Base Number: 374047-S
- Callout Name: 9430
- -390528-S100
Stud- (WW-122-C) STUD - 3/8 - 16 - 16 x 2.42. Attach 9431 to cylinder head. Hole numbers 1 & 6.
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 390528-S2
- Callout Name: 9430
- -390529-S2
Stud-3/8-16 X 2.22 H- (WW-135D) STUD - 3/8 - 16 - 16 x 2.66. Attach 9430 to cylinder head.
- Callout Name: 9430
- VALVE (INTAKE)
E3ZZ-6507-A
Valve - Inlet- "Before 7/22/85" , Std.-stem dia.-.3418"
Std.-stem dia.-.3418" - Require Quantity: 8
- Package Quantity: 1
- Base Number: 6507
- Callout Name: 6507
$18.75 $13.731 - C5TZ-6507-A
Valve Intake Std- Std. Stem dia. - .3419"
- Require Quantity: 6
- Package Quantity: 1
- Callout Name: 6507
- ROD (VALVE PUSH)
$18.75 $13.731 
D9HZ-6500-A
TAPPET ASSY. (VALVE)Tappet - Valve- Hydraulic
- Require Quantity: 12
- Package Quantity: 8
- Callout Name: 6500
- Replaced By: F1DZ-6500-A
$9.48 $6.108
-351418-S
HEAD (CYLINDER)Insert- (UU-136)-Insert (plugs for thermactor holes in head) - 5/8" - 11 x 7/16" - 14 x 1 1/8" , STANDARD PART
(UU-136)-Insert (reducer for thermactor holes in head)-5/8"-11 x 7/16"-14 x 1 1/8" , STANDARD PART
(UU-136)-insert(used in front and rear of cyl. head)-5/8"-11 O.D. thread x 7/16"-14 I.D. thread , STANDARD PART - Require Quantity: 4
- Package Quantity: 1
- Callout Name: 6049
7HA-6518-A
KEY (VALVE SPRING RETAINER)Key- Exhaust & intake
Intake and exhaust - Require Quantity: 24
- Package Quantity: 1
- Base Number: 6518
- Callout Name: 6518
- Exhaust & intake
- ARM (VALVE ROCKER)
- D8AZ-6564-B
Arm Assy - Valve Rocker- Stamped steel type
- Require Quantity: 16
- Package Quantity: 1
- Callout Name: 6564
D3AZ-6A527-A
BOLT (VALVE ROCKER ARM SUPPORT)Screw- 5/16"-18 x 1 3/8"
Hex. hd-5/16"-18 x 1 3/8" - Require Quantity: 16
- Package Quantity: 1
- Base Number: 6A527
- Callout Name: 6A527
- 5/16"-18 x 1 3/8"
- RETAINER (VALVE SPRING)
D3OZ-6514-A
Retainer Assembly-Valve Spr- Exhaust
Exhaust (Rotator) - Require Quantity: 8
- Package Quantity: 1
- Base Number: 6514
- Callout Name: 6514
- Exhaust
D4AZ-6514-A
Retainer - Valve Spring- Intake
Intake-r/b F1ZZ 6514-A - Require Quantity: 8
- Package Quantity: 1
- Callout Name: 6514
- Replaced By: F1ZZ-6514-A
- Intake
- D9TZ-6514-A
Retainer - Valve Spring- "From Ser. GJ0,001" , Exhaust-rotator type
- Require Quantity: 6
- Package Quantity: 1
- Callout Name: 6514
D4AZ-6517-A
SLEEVE (VALVE SPRING RETAINING) - INTAKESleeve- Require Quantity: 8
- Package Quantity: 1
- Base Number: 6517
- Callout Name: 6517
D5OZ-6513-A
SPRING (VALVE)Spring - Valve- Exhaust
- Require Quantity: 8
- Package Quantity: 1
- Base Number: 6513
- Callout Name: 6513
D6OZ-6571-A
SEAL (VALVE STEM)Seal - Valve Stem- "Before 2/20/86" , #D4AE-AA-Intake & exhaust
"Before 7/21/86" , Use w/std. and .003" O/S valves
Intake and exhaust - Require Quantity: 12
- Package Quantity: 1
- Callout Name: 6571
D8AZ-6A527-A
BOLT (VALVE ROCKER ARM)Screw- 5/16" -18 x 1 3/8"-bolt, use with stamped steel rocker arm
5/16"-18 x 1.40" - Require Quantity: 16
- Package Quantity: 1
- Base Number: 6A527
- Callout Name: 6A527
E4AZ-6505-A
VALVE (EXHAUST)Valve - Exhaust- Std.-stem dia.-.3414" , Use with stamped steel rocker arm
- Require Quantity: 8
- Package Quantity: 1
- Callout Name: 6505
E53Z-6A528-A
SEAT (VALVE ROCKER ARM)Seat - Valve Rocker Arm Fulcrum- Require Quantity: 16
- Package Quantity: 1
- Base Number: 6A528
- Callout Name: 6A528
- E5TZ-6A588-A
GUIDE (VALVE ROCKER ARM FULCRUM)Guide - Valve- Require Quantity: 8
- Package Quantity: 1
- Callout Name: 6A588
Genuine Ford Parts, the Right Choice
FordPartsGiant.com offers the wholesale prices for genuine 1980 Ford E-250 parts. Parts like Cylinder Block Cylinder Head, Valves And Related Parts are shipped directly from authorized Ford dealers and backed by the manufacturer's warranty. Parts fit for the following vehicle options. Engine: 8 Cyl 7.5L. Transmission: 3MT.