My Garage
My Account
Cart
Genuine Mercury Mariner Wheel Seal
Wheel Axle Seal- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Wheel Seal found
Mercury Mariner Seal
Part Number: 5L8Z-4B416-AA$14.55 MSRP: $21.27You Save: $6.72 (32%)Ships in 1-2 Business Days
Mercury Mariner Wheel Seal
The Wheel Seal of Mercury Mariner vehicles is essential since they guard the hub and bearing from various conditions that are detrimental to the vehicle and these are include rocks, debris, and dirt. It is required that lubrication should be done well in order to avoid overheating and making the materials brittle. However, to achieve the optimal results of the equipment's operation, it is recommended to check for leaks or cracks. Some of the brands that you can expect to find here are Motorcraft and Timken available products include front and rear inner and outer wheel seal sets and full kits. These high-grade materials ensure that the mastery of the trucks, cars, and SUVs is kept intact to ensure the right wheel bearing assembly is achieved.
We provide a wide range of Mercury Mariner Wheel Seal at the optimal prices. If you need Mercury Mariner Wheel Seal, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.
Mercury Mariner Wheel Seal Parts Questions & Experts Answers
- Q: How can the rear Wheel Seal be replaced without removing the transaxle on Mercury Mariner?A:Oil leaks quite commonly arise from the wear and tear of the wheel seals; replacing these seals is quite accessible because the repair can be performed without extracting the transaxle from the car. Oil seals of the wheel are fixed on the sides of the transaxle where the driveaxles are connected. If leakage at the seal is suspected, remove the vehicle and support it on jackstands; if the seal is leaking, lubricant will be found oozing out on either side of the transaxle below the seal. Take out the driveaxles and using a screwdriver or bar, pry out the wheel seal that is fitted in the transaxle bore. If the above said tools are not able to help in the removal of the wheel seal, then there is a special wheel seal removing tool which is available in the auto parts stores. The new wheel seal should be fitted as follows; firstly, obtain a large section of pipe or a large deep socket, slightly smaller than the outside diameter of the seal as a drift. Center it properly and make sure it bottoms, using the transaxle lubricant to slick the lip of the new seal without distorting the lip of the new seal before you reinstall the driveaxle(s).
