Genuine Mercury Lynx HVAC Pressure Switch

Air Pressure Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 HVAC Pressure Switches found

  • View related parts

    Mercury Lynx Switch - Air Condition System - Vacuum

    Part Number: E35Y-19E561-A
    $30.41 MSRP: $49.27
    You Save: $18.86 (39%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Switch - Air Condit.System - Vacuum
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1981-1987 Mercury Lynx | 4 Cyl 1.6L, 4 Cyl 1.9L, 4 Cyl 2.0L | 3AT ATX, 4MT, 5MT
  • View related parts

    Mercury Lynx Valve Assembly - Pressure

    Part Number: E73Z-19D644-A
    $25.01 MSRP: $37.27
    You Save: $12.26 (33%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pressure Relief Valve
    • Replaced by: F1CZ-19D644-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1981-1987 Mercury Lynx | 4 Cyl 1.6L, 4 Cyl 1.9L, 4 Cyl 2.0L | 3AT ATX, 4MT, 5MT

Mercury Lynx HVAC Pressure Switch

The Mercury Lynx HVAC Pressure Switch has the task of controlling the pressure in the refrigerant circuit so that the cabin gets cool or warm air without incurring any expensive damage. The HVAC Pressure Switch sends fast feedback to the A/C control module and cuts power to the compressor as soon as readings drift. This gives every Mercury driver confidence the system won't fail at a red light. Throughout the entire Lynx production run, one proven design of this HVAC Pressure Switch remained, meaning that owners have direct compatibility across base, L, and sporty trims. The vibration resistant design of a sealed sensor core and electrical resistance reduction of gold plated contacts account for their strong reputation for reliability within the wider Mercury climate chain. Through its synergy with the fan relay and clutch, the HVAC Pressure Switch acts as both a performance-enhancing and safety-monitoring device ensuring the Lynx heat and cool cycle time is optimal, allowing for quicker target temperature achievement and lower fuel consumption. The installation remains straightforward as only the connectors are different for the early and late Mercury years, but every Lynx will be protected the same way once the HVAC Pressure Switch snaps in the ON position. In the event of pressure loss due to a small leak, the HVAC Pressure Switch interrupts the output immediately, preventing any heating of hoses and seals and blocking those annoying dash codes that drive Mercury owners nuts. Its intelligent response also protects the condenser and evaporator, two expensive components that keep a Lynx cool in summer traffic. The HVAC Pressure Switch is small and light. It hardly adds any weight and frequently lasts longer than the original Mercury water pump. Thus, Lynx enthusiasts consider this pressure switch to be a small price to pay for a large benefit.

We provide a wide range of Mercury Lynx HVAC Pressure Switch at the optimal prices. If you need Mercury Lynx HVAC Pressure Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Related Mercury Lynx Parts