How often should the Door Hinge, Door Latch Assembly, Door Lock, Hood Hinge, Hood Latch and Trunk Latch be lubricated on Mercury Grand Marquis?

Every 3000 miles of drive or once in 3 months the hinges and latch assembly of the doors, the hood and the trunk should be lubricated by a few drops of light oil or lock lubricant. Also the door latch strikers must be oiled smeared thinly with grease to reduce wear and make the door to open easily. Also it is advised to spray the locks of the door and the trunk with the spray-on graphite lubricant.

Genuine Mercury Grand Marquis Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Hood Hinges found

View related parts
Mercury Grand Marquis Hood Hinge Assembly
Part Number: 6W7Z-16797-A
$16.84 MSRP: $23.98
You Save: $7.14 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assy - Hood; Hinge
- Position: Driver Side
- Replaces: F8AZ-16797-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Mercury Grand Marquis | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT 4R70W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Mercury Grand Marquis Hood Hinge Assembly
Part Number: F8AZ-16797-AA
$16.84 MSRP: $23.98
You Save: $7.14 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assy - Hood
- Position: Driver Side
- Replaced by: 6W7Z-16797-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2006 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Mercury Grand Marquis Hood Hinge Assembly
Part Number: F8AZ-16796-AA
Product Specifications
- Other Name: Hinge Assy - Hood
- Position: Passenger Side
- Replaced by: 6W7Z-16796-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2006 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Mercury Grand Marquis Hinge Assembly Hood
Part Number: F2AZ16797A
Product Specifications
- Other Name: Hinge Assy - Hood; Hinge
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1997 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT AOD, 4AT AODE
View related parts
Mercury Grand Marquis Hinge Assembly Hood
Part Number: F2AZ16796A
Product Specifications
- Other Name: Hinge Assy - Hood; Hinge
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1997 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT AOD, 4AT AODE
View related parts
Mercury Grand Marquis Hood Hinge Assembly
Part Number: 6W7Z-16796-A
Product Specifications
- Other Name: Hinge Assy - Hood; Hinge
- Position: Passenger Side
- Replaces: F8AZ-16796-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Mercury Grand Marquis | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT 4R70W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Mercury Grand Marquis Hood Hinge

The Hood Hinge of the Mercury Grand Marquis allows the hood of the car to pivot safely while holding it firmly shut. The Hood Hinge holds the hood shut against wind and bumps. Each Mercury Grand Marquis employs a mechanism on each side that works like a strong lever to help support the heavy weight of the hood while swinging down. Each hinge operates on a simple pin joint and is supported by stout steel arms that remain aligned during opening cycles of repeated nature. When the lid is shut, some of the pressure keeps the panel in place so sudden gusts cannot flip it up at speed. Over time, vibration and rust can make drivers' moving points worn, which can make the hood feel loose and uneven. A new Hood Hinge restores the factory smoothness. It is a straightforward and inexpensive task for Mercury owners to replace a Hood Hinge as it bolts off and on without special tools. Grand Marquis models retained the same steel design across the production run, so there are no confusing style changes; just confirm the hinge matches your Grand Marquis year. A properly greased Mercury Hood Hinge also prevents squeaks and extends the life of the latch.

We provide a wide range of Mercury Grand Marquis Hood Hinge at the optimal prices. If you need Mercury Grand Marquis Hood Hinge, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Mercury Grand Marquis Hood Hinge Parts Questions & Experts Answers

Hood Hinge Assembly
6W7Z-16797-A
Q: How often should the Door Hinge, Door Latch Assembly, Door Lock, Hood Hinge, Hood Latch and Trunk Latch be lubricated on Mercury Grand Marquis?
A:
Every 3000 miles of drive or once in 3 months the hinges and latch assembly of the doors, the Hood and the trunk should be lubricated by a few drops of light oil or lock lubricant. Also the door latch strikers must be oiled smeared thinly with grease to reduce wear and make the door to open easily. Also it is advised to spray the locks of the door and the trunk with the spray-on graphite lubricant.