How do you remove and install a bumper on Mercury Grand Marquis?

To get to the bumper you must first unbolt the plastic bumper cover or fascia normally there are 4 fasteners or more beneath the car near the radiator several fasteners in the fender well on each side you can get to them after you remove cornering lamps. Rear bumper covers are attached via fasteners at the base of the structure seen from below, screws within fenderwell, and nuts within the trunk that are visible once the most rear trunk interior trim is removed. Subsequently, you should remove any wire connection or some part that will hinder the removal of the bumper and then place a jack or jack stand beneath to support the bumper. Next, you undo the two bolts or nuts that hold the bumper in place to be able to take it off. Installation will go in a reverse order and do not forget to tighten the retaining bolts and the bumper cover and all other parts that were removed.

Genuine Mercury Grand Marquis Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Bumpers found

View related parts
Mercury Grand Marquis Cover
Part Number: YW3Z-17K835-BA
$21.87 MSRP: $31.97
You Save: $10.10 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 9W3Z-17C830-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2008 Mercury Grand Marquis | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT 4R70W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Mercury Grand Marquis Bumper Assembly - Front
Part Number: 4W7Z-17757-A
$78.08 MSRP: $116.18
You Save: $38.10 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assy - Front; Impact Bar
- Manufacturer Note: Steel, FROM 12/1/03
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2011 Mercury Grand Marquis | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT 4R70W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Mercury Grand Marquis Cover
Part Number: 3W3Z-17D957-BA
$270.65 MSRP: $423.55
You Save: $152.90 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Mercury Grand Marquis Bumper Assembly Rear
Part Number: F2AZ17906B
$215.11 MSRP: $293.93
You Save: $78.82 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assy - Rear; Reinforcement
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT, 4AT AOD, 4AT AODE
View related parts
Mercury Grand Marquis Cover
Part Number: 9W3Z-17D957-BAPTM
$201.79 MSRP: $300.28
You Save: $98.49 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Grand Marquis | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Mercury Grand Marquis Cover
Part Number: 6W3Z-17D957-CA
$11.72 MSRP: $17.13
You Save: $5.41 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: 9W3Z-17C829-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Mercury Grand Marquis | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT 4R70W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Mercury Grand Marquis Cover
Part Number: F8MZ-17K835-AA
$21.87 MSRP: $31.97
You Save: $10.10 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Paint to match
- Replaced by: 9W3Z-17C830-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-1999 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Mercury Grand Marquis Cover
Part Number: 9W3Z-17K835-AAPTM
Product Specifications
- Other Name: Bumper Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Grand Marquis | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Mercury Grand Marquis Bumper Assembly - Front
Part Number: 3W3Z-17757-AA
Product Specifications
- Other Name: Bumper Assy - Front; Impact Bar
- Manufacturer Note: Steel, Maruader
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Mercury Grand Marquis Cover
Part Number: 3W3Z-17D957-AAA
Product Specifications
- Other Name: Bumper Cover
- Manufacturer Note: Paint to match, Marauder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Mercury Grand Marquis Cover
Part Number: 3W3Z-17D957-BACP
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Mercury Grand Marquis Cover
Part Number: 3W3Z-17K835-AAA
Product Specifications
- Other Name: Bumper Cover
- Manufacturer Note: Paint to match, Marauder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Mercury Grand Marquis Bumper Assembly - Front
Part Number: 3W7Z-17757-AA
Product Specifications
- Other Name: Bumper Assy - Front; Impact Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Mercury Grand Marquis Bumper Assembly - Rear
Part Number: 3W7Z-17906-AA
Product Specifications
- Other Name: Bumper Assy - Rear; Reinforcement
- Manufacturer Note: (CP) Designates Crash Part - When Ordering Please Refer To Crash Part Truckload Program Guidelines
- Position: Rear
- Replaces: F8AZ-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Mercury Grand Marquis | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT 4R70W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Mercury Grand Marquis Bumper Assembly - Rear
Part Number: 3W7Z-17906-AACP
Product Specifications
- Other Name: Bumper Asy - Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Mercury Grand Marquis | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT 4R70W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Mercury Grand Marquis Bumper Assembly - Front
Part Number: 4W7Z-17757-ACP
Product Specifications
- Other Name: Bumper Assy - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Mercury Grand Marquis | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Mercury Grand Marquis Cover
Part Number: 9W3Z-17D957-BACP
Product Specifications
- Other Name: Bumper Assy - Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Grand Marquis | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Mercury Grand Marquis Cover
Part Number: 9W3Z-17K835-AACP
Product Specifications
- Other Name: Cover - Bumper
- Replaces: YW3Z-17K835-BACP
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2011 Mercury Grand Marquis | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT 4R70W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Mercury Grand Marquis Cover
Part Number: F5MY-17D957-A
Product Specifications
- Other Name: Bumper Cover
- Manufacturer Note: Paint to match
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT AODE
View related parts
Mercury Grand Marquis Bumper Assembly - Rear
Part Number: F8AZ-17906-AA
Product Specifications
- Other Name: Bumper Assy - Rear
- Position: Rear
- Replaced by: 3W7Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2003 Mercury Grand Marquis | 8 Cyl 4.6L | 4AT 4R70W

| Page 1 of 2 |Next >

1-20 of 26 Results

Mercury Grand Marquis Bumper

We provide a wide range of Mercury Grand Marquis Bumper at the best prices possible. If you need Mercury Grand Marquis Bumper, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Mercury Grand Marquis Bumper Parts Questions & Experts Answers

Cover
YW3Z-17K835-BA
Q: How do you remove and install a bumper on Mercury Grand Marquis?
A:
To get to the bumper you must first unbolt the plastic bumper cover or fascia normally there are 4 fasteners or more beneath the car near the radiator several fasteners in the fender well on each side you can get to them after you remove cornering lamps. Rear bumper covers are attached via fasteners at the base of the structure seen from below, screws within fenderwell, and nuts within the trunk that are visible once the most rear trunk interior trim is removed. Subsequently, you should remove any wire connection or some part that will hinder the removal of the bumper and then place a jack or jack stand beneath to support the bumper. Next, you undo the two bolts or nuts that hold the bumper in place to be able to take it off. Installation will go in a reverse order and do not forget to tighten the retaining bolts and the bumper cover and all other parts that were removed.