How to remove and install a Turn Signal Switch on Mercury Cougar?

First of all, take off the negative cable from the battery. Then, the steering column cover is removed. The Turn Signal Switch should be pulled out by removing the two retaining bolts and disconnecting it from the connector to withdraw the switch assembly off the steering column. A small screwdriver can be used to release the latch and unplug the electrical connector. Then, you should plug in the electrical connector, put the switch in position and insert screws. Make sure that you tighten bolts well. After that, one must install a steering column cover. You need to connect a negative battery cable again.

Genuine Mercury Cougar Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Turn Signal Switches found

View related parts
Mercury Cougar Direction Indicator Switch Assembly
Part Number: E9SZ-13K359-D
$133.42 MSRP: $182.30
You Save: $48.88 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch Assy - Direction Indicator; Combination Switch, Switch
- Manufacturer Note: W/O AUTO HEADLAMP DIMMER
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1993 Mercury Cougar | 6 Cyl 3.8L, 8 Cyl 5.0L | 4AT AOD, 5MT
View related parts
Mercury Cougar Switch - Dir. Indic/Warning Flasher
Part Number: F8RZ-13341-AA
$70.85 MSRP: $84.83
You Save: $13.98 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Signal Switch
- Manufacturer Note: Turn Signal
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Mercury Cougar | 4 Cyl 2.0L, 6 Cyl 2.5L | 4AT CD4E, 5MT
View related parts
Mercury Cougar Switch - Dir. Indic/Warning Flasher
Part Number: E7SZ-13341-A
Product Specifications
- Other Name: Turn Signal & Hazard Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-1988 Mercury Cougar | 4 Cyl 2.3L, 6 Cyl 3.8L, 8 Cyl 5.0L | 3AT C5, 4AT AOD, 5MT
View related parts
Mercury Cougar Switch - Dir. Indic/Warning Flasher
Part Number: EOAZ-13341-A
Product Specifications
- Other Name: Turn Signal & Hazard Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1982 Mercury Cougar | 4 Cyl 2.3L, 6 Cyl 3.3L, 6 Cyl 3.8L, 8 Cyl 4.2L, 8 Cyl 5.0L | 3AT C3, 3AT C4, 3AT C5, 4AT AOD, 4MT
View related parts
Mercury Cougar Direction Indicator Switch Assembly
Part Number: E9SZ-13K359-B
Product Specifications
- Other Name: Turn Signal & Hazard Switch; Multifunction Switch
- Manufacturer Note: W/O AUTO HEADLAMP DIMMER
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1993 Mercury Cougar | 6 Cyl 3.8L, 8 Cyl 5.0L | 4AT AOD, 5MT
View related parts
Mercury Cougar Switch Dir Indic/Warn
Part Number: E2FZ13341A
Product Specifications
- Other Name: Switch - Dir. Indic/Warning Flasher; Turn Signal & Hazard Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1984 Mercury Cougar | 4 Cyl 2.3L, 6 Cyl 3.3L, 6 Cyl 3.8L, 8 Cyl 4.2L, 8 Cyl 5.0L | 3AT C5, 4AT AOD

Mercury Cougar Turn Signal Switch

The Mercury Cougar Turn Signal Switch helps the driver visibly indicate their lane change or turn to make city or highway driving safer for everyone. The Turn Signal Switch is mounted on the steering column. It works through a lever that completes an electric path when flicked up or down. Then, it sends electric power to the signal lamps so that nearby motorists can understand your next move. The early Mercury Cougar models applied a very simple Turn Signal Switch that only operated the blinkers. In later years, a multi-function Turn Signal Switch style was adopted that added knobs onto the Turn Signal Switch for headlights, fog lamps, windshield wipers, and cruise control, with no change to the hand motion. Even with these added tasks, the internal click-spring mechanism within each Mercury unit remains locked until the wheel self-cancels the command during the turn, keeping every Cougar predictable on the road. When a device gets worn out, the light or cancel of blinkers may fail, putting safety at risk. Using a direct-fit Mercury Cougar replacement, which is matched for electrical connectors, column fit, and lever length, ensures crisp Turn Signal Switch operation.

We provide a wide range of Mercury Cougar Turn Signal Switch at the optimal prices. If you need Mercury Cougar Turn Signal Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Mercury Cougar Turn Signal Switch Parts Questions & Experts Answers

Direction Indicator Switch Assembly
E9SZ-13K359-D
Q: How to remove and install a Turn Signal Switch on Mercury Cougar?
A:
First of all, take off the negative cable from the battery. Then, the steering column cover is removed. The Turn Signal Switch should be pulled out by removing the two retaining bolts and disconnecting it from the connector to withdraw the switch assembly off the steering column. A small screwdriver can be used to release the latch and unplug the electrical connector. Then, you should plug in the electrical connector, put the switch in position and insert screws. Make sure that you tighten bolts well. After that, one must install a steering column cover. You need to connect a negative battery cable again.