My Garage
My Account
Cart
Genuine Lincoln MKX Wheel Seal
Wheel Axle Seal- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Wheel Seal found
Lincoln MKX Seal
Part Number: 5L8Z-4B416-AA$14.55 MSRP: $21.27You Save: $6.72 (32%)Ships in 1-2 Business Days
Lincoln MKX Wheel Seal
Wheel Seal Lincoln MKX helps in shielding the hub and bearing from many aspects like rocks, debris, and dirt and many others. To avoid the product being overheated and becoming brittle, proper lubrication of the working surfaces is required. It is advised to have it checked for leaks or crack so that the item can deliver its optimal at all times. Choosing from a long list of the front and rear inner and outer wheel seals or considering complete wheel seal kits from the top manufacturers such as Motorcraft and Timken, you will surely find something suitable for your vehicle. The materials used are of high-grade that enables the trucks, cars and SUVS to have a well-fitted assembly without compromising the wheel bearing.
We provide a wide range of Lincoln MKX Wheel Seal at the optimal prices. If you need Lincoln MKX Wheel Seal, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.
Lincoln MKX Wheel Seal Parts Questions & Experts Answers
- Q: How can the rear Wheel Seal be replaced without removing the transaxle on Lincoln MKX?A:Oil leaks frequently occur due to wear of the wheel seals, and replacement of these seals is relatively easy since the repair can be performed without removing the transaxle from the vehicle. Wheel seals are located at the sides of the transaxle, where the driveaxles are attached. If leakage at the seal is suspected, raise the vehicle and support it securely on jackstands; if the seal is leaking, lubricant will be found on the sides of the transaxle, below the seals. Remove the driveaxles, then use a screwdriver or prybar to carefully pry the seal out of the transaxle bore. If the seal cannot be removed with these tools, a special seal removal tool, available at auto parts stores, will be required. Using a large section of pipe or a large deep socket, slightly smaller than the outside diameter of the seal, as a drift, install the new seal by driving it into the bore squarely and ensuring it is completely seated. Coat the seal lip with transaxle lubricant before installing the driveaxle(s), taking care not to damage the lip of the new seal with the inboard splines of the driveaxle.
