Genuine Lincoln Aviator Differential Mount

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Differential Mounts found

  • View related parts
    Product Specifications
    • Manufacturer Note: Insulator (differential front lower)
    • Position: Lower
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2003-2005 Lincoln Aviator | 8 Cyl 4.6L DOHC EFI | 5-Speed Automatic Transmission 5R55S, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • View related parts
    Product Specifications
    • Other Name: Differential Insulator, Front Insulator Plate
    • Position: Upper
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2003-2005 Lincoln Aviator | 8 Cyl 4.6L DOHC EFI | 5-Speed Automatic Transmission 5R55S, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • View related parts
    Product Specifications
    • Replaced by: 7L2Z-4B425-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2003-2005 Lincoln Aviator | 8 Cyl 4.6L DOHC EFI | 5-Speed Automatic Transmission 5R55S, Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Lincoln Aviator Differential Mount

The Lincoln Aviator Differential Mount is built to provide rock-solid support for the rear differential while cutting vibration and controlling torque flow. This Differential Mount is specifically designed to link the differential housing to the subframe. It uses a tough rubber and steel core so that the wheels can spin at different speeds without shaking the cabin of the Aviator. Subsequent Lincoln models were upgraded to a hydro-elastic Differential Mount, which comes with fluid pockets and reinforced bushings that result in a quieter ride for the Aviator. Also, bearing life is extended with the upgrade even during spirited driving. Regardless of whether you have a 2003 debut or the updated hybrid model, the Differential Mount fits into every variant of the Aviator drivetrain, confirming compatibility with Standard, Reserve, and Black Label trims. The differential is locked in a single place, which helps the Lincoln suspension with its proper alignment, thus increasing power delivery as well as lowering stress on the other mounts. The result is a sharper acceleration feel, more confident cornering, and reduced risk of trunk floor damage, advantages that translate directly into higher efficiency and day-to-day safety. According to the factory, the Differential Mount is one of the inspection points needed every few thousand miles. Heat or a dry driveshaft joint can create loads that the nevertheless tough Lincoln hardware should not take for too long. The Differential Mount remains a single-bolt component, allowing for a quick replacement and restoring that Aviator smoothness without any complicated recalibration. The updated Differential Mount, which has unique hydro-elastic chambers, absorbs road jolt better than tough solid rubber rivals, revealing why Lincoln is one of the optimal for refined performance hardware. The Aviator powertrain, when equipped with a new Differential Mount, certainly feels tighter, adding Lincoln engineering confidence to everyday commuting as well as extended highway drives.

We provide a wide range of Lincoln Aviator Differential Mount at the optimal prices. If you need Lincoln Aviator Differential Mount, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Related Lincoln Aviator Parts