The models are fitted with speakers in the doors from the factory and extra rear speakers are provided for models with AM/FM sound. Your specific model may have variations from the following procedure due to size and configuration of aftermarket speakers which has been fitted into some variants. To take out the door speakers, first, one has to take off the door panel, then the speakers that are attached to the door using screws are pulled out and the electrical connection also is disconnected. There are some conditions in which it is prohibited to continue the operation of radio with the speakers disconnected. Installation, on the other hand, is done in the reverse order that removal took. The procedure for the rear speakers is similar to that of the front ones: you have to take out the screws, extract the speaker out of the trim panel and, finally, unlock the electrical connector. As before, do not operate the radio with the speakers disconnected, and installation is done in the reverse order to the removal.