How to remove and install the rear trunk latch and trunk lock cylinder on Ford Mustang?

To replace the trunk lid latch, firstly open the trunk and then gently apply a force to the latch trim cover in order to remove the mounting clips. It is recommended that a line be drawn around the trunk lid latch assembly for alignment during a repair. Disconnect the electrical connectors and the trunk lock actuator from the lock cylinder then un-bolt the retaining nuts and pull the latch off. For models up to 2010, go to the trunk to complete the following; pull the latch trim cover off in the following manner; Detach any electrical connectors and trunk lock actuator to the lock cylinder: you must detach the actuator before the removal of the mounting fasteners. After that, the lock cylinder mounting fasteners should be withdrawn and the lock cylinder should be taken out from the vehicle. Installation process is, however, the reverse of the removal process. Please remember that for the 2011+ cars, the trunk lock cylinder has been replaced by the trunk lid release switch which should be ordered with the latch assembly only.

Genuine Ford Mustang Trunk Lock Cylinder

Back Door Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Trunk Lock Cylinders found

View related parts
Ford Mustang Lock Cylinder Assembly
Part Number: 6R3Z-6343262-A
$150.35 MSRP: $233.10
You Save: $82.75 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Lock; Lock Cylinder, Lock Cylinder Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2010 Ford Mustang | 6 Cyl 4.0L SOHC EFI, 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.4L DOHC EFI S/C ALUM, 8 Cyl 5.8L DOHC SC | 5-Speed Automatic Transmission 5R55S, 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission (T56), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Lock Cylinder Assembly
Part Number: 6R3Z-6343262-B
$192.57 MSRP: $281.53
You Save: $88.96 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly - Lock; Lock Cylinder, Lock Cylinder Assembly
- Replaces: 5W4Z-5443262-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2010 Ford Mustang | 6 Cyl 4.0L SOHC EFI, 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.4L DOHC EFI S/C ALUM, 8 Cyl 5.8L DOHC SC | 5-Speed Automatic Transmission 5R55S, 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission (T56), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Lock Cylinder Assembly
Part Number: FR3Z-7643262-A
$100.90 MSRP: $147.52
You Save: $46.62 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2019 Ford Mustang | 4 Cyl 2.3L TIVCT DI TC, 6 Cyl 3.7L PFI NA, 8 Cyl 5.0L DOHC EFI Modular, 8 Cyl 5.0L MOD DOHC SEFI NA, 8 Cyl 5.2L | 10-Speed Automatic Transmission (10R80), 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission-3160, 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang CYLINDER ASY - LOCK
Part Number: FR3Z-7643262-B
$114.49 MSRP: $167.38
You Save: $52.89 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025 Ford Mustang | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Cylinder Assy - Actuating
Part Number: XR3Z-6343262-BA
Product Specifications
- Other Name: Lock Cylinder
- Manufacturer Note: Luggage Compartment
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2004 Ford Mustang | 6 Cyl 3.8L, 6 Cyl 3.8L OHV EFI, 6 Cyl 3.9L OHV EFI NA, 8 Cyl 4.6L, 8 Cyl 4.6L DOHC EFI, 8 Cyl 4.6L DOHC EFI S/C, 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.4L | 4AT 4R70W, 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 5MT, 5-Speed Manual Transmission (T450D), 5-Speed Manual Transmission T5OD, 5-Speed Manual Transmission TR3650, 6-Speed Manual Transmission Tremec T56, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Mustang Lock Cylinder Assembly
Part Number: 5W6Z-7643262-AA
Product Specifications
- Other Name: Cylinder Assy - Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford Mustang | 6 Cyl 3.7L PFI NA, 8 Cyl 4.6L SOHC EFI, 8 Cyl 5.0L DOHC EFI Modular, 8 Cyl 5.0L MOD DOHC SEFI NA, 8 Cyl 5.4L DOHC EFI S/C ALUM, 8 Cyl 5.8L DOHC SC | 6-Speed Automatic Transmission (6R80), 6-Speed Manual Transmission (T56), 6-Speed Manual Transmission-MT82, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Ford Mustang Trunk Lock Cylinder

The Ford Mustang Trunk Lock Cylinder could mean the difference between keeping and losing your camping gear, spare tires, or tools to a thief. With a quick turn of the factory key, the tumblers of the Trunk Lock Cylinder move and lock the latch, securing the lid even on bumpy roads. The location of the rear panel that your hand grazes after loading bags makes a small movement into solid security. In every Ford model that revolves around the idea of the famous pony car, the goal remains simple, keep valuables hidden and held tight. Whether a classic Mustang fastback or a modern Mustang coupe, the same Trunk Lock Cylinder design protects fishing poles, building materials, and groceries. Whenever you park your vehicle, a smooth Trunk Lock Cylinder is as important as the door locks since criminals only need seconds to strike. The tired Ford units are swapped, and a clear click is heard showing that the locks are functioning exactly as expected. It lets any Ford Mustang fan drive away with confidence. Maintenance is pretty easy. Periodic oiling will keep the Trunk Lock Cylinder moving for years to come.

We provide a wide range of Ford Mustang Trunk Lock Cylinder at the optimal prices. If you need Ford Mustang Trunk Lock Cylinder, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Ford Mustang Trunk Lock Cylinder Parts Questions & Experts Answers

Lock Cylinder Assembly
6R3Z-6343262-A
Q: How to remove and install the rear trunk latch and trunk lock cylinder on Ford Mustang?
A:
To replace the trunk lid latch, firstly open the trunk and then gently apply a force to the latch trim cover in order to remove the mounting clips. It is recommended that a line be drawn around the trunk lid latch assembly for alignment during a repair. Disconnect the electrical connectors and the trunk lock actuator from the lock cylinder then un-bolt the retaining nuts and pull the latch off. For models up to 2010, go to the trunk to complete the following; pull the latch trim cover off in the following manner; Detach any electrical connectors and trunk lock actuator to the lock cylinder: you must detach the actuator before the removal of the mounting fasteners. After that, the lock cylinder mounting fasteners should be withdrawn and the lock cylinder should be taken out from the vehicle. Installation process is, however, the reverse of the removal process. Please remember that for the 2011+ cars, the trunk lock cylinder has been replaced by the trunk lid release switch which should be ordered with the latch assembly only.