Genuine Ford GT Rack And Pinion

Steering Rack And Pinion
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rack And Pinions found

  • Ford GT Rack And Pinion - 4G7Z-3504-A
    View related parts

    Ford GT Steering Gear Assembly

    Part Number: 4G7Z-3504-A
    $3411.67 MSRP: $5610.91
    You Save: $2199.24 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Gear Assy - Steering
    • Manufacturer Note: Warranty Eligible
    • Replaces: 4G7Z-3504-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2005-2006 Ford GT | 8 Cyl 5.4L DOHC EFI S/C ALUM | 6-Speed Manual Rear Transaxle
  • Ford GT Rack And Pinion - 4G7Z-3504-AA
    View related parts

    Ford GT Steering Gear Assembly

    Part Number: 4G7Z-3504-AA
    $3411.67 MSRP: $5610.91
    You Save: $2199.24 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Gear Assy - Steering
    • Manufacturer Note: Warranty Eligible
    • Replaced by: 4G7Z-3504-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2005 Ford GT | 8 Cyl 5.4L DOHC EFI S/C ALUM | 6-Speed Manual Rear Transaxle

Ford GT Rack And Pinion

The Ford GT Rack And Pinion provides a rapidly responsive rack slide that aligns the front tires and translates even the minimum steering inputs into action. The proven Rack And Pinion is mounted in a rigid steel tube that is bolted to the chassis. The pinion gear meshes with the rack before tie-rods pivot the knuckles. This allows for low play and vivid feedback. After years of track testing, drivers are convinced the straight cut teeth inside the Rack And Pinion cut friction, run cooler, and tolerate higher torque than helical cuts. Every modern GT enjoys this gain. Early versions of the Ford GT had hydraulic assist with Rack And Pinion, and the later models adopted a lighter electric assist, but the basic geometry never changed. The Rack And Pinion, owing to its stability, transmits road information clearly and displays no slack at all, allowing the drivers to position the car just right through tight city gaps or corners. The steering feel remains constant whether the car is equipped with an original V8 or newer V6, and any Ford owner can easily directly replace multiple GT generations compatible components. The seals, along with the hardened gears applied in the unit, allow it to take thousands of spirited miles with ease. This goes a long way to prove the belief in Ford reliability. The precise Rack And Pinion increases the safety of lane changes by eliminating lag time, and its efficient design ensures that little energy is wasted, so assist pumps and motors run cooler and last longer. The Rack And Pinion additionally aligns tie-rods with suspension movement, which helps in reducing bump steer and keeping the tires in contact with the road. In summary, the Ford heritage of track proof, a lightweight center tube, and easy service points mean that you can use Rack And Pinion, a specification that helps every Ford GT to steer.

We provide a wide range of Ford GT Rack And Pinion at the optimal prices. If you need Ford GT Rack And Pinion, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Related Ford GT Parts