Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2015-2024 Ford Edge | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L DOHC, 4 Cyl 2.0L Duratorq-TDCi (132kW/180PS), 4 Cyl 2.0L EcoBoost (240PS), 6 Cyl 2.7 L GAS, 6 Cyl 2.7L, 6 Cyl 3.5L Cyclone Petrol TIVCT | 6-Speed Automatic Transmission 6DCT450 - MPS6, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transaxle - MMT6, 8-Speed Automatic Transmission 8F57, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Front-Wheel Drive (Right Hand Drive), Left Hand Drive, RHD 4WD (FTD)
Ford Edge HVAC Pressure Switch
We provide a wide range of Ford Edge HVAC Pressure Switch at the best prices possible. If you need Ford Edge HVAC Pressure Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Ford Edge HVAC Pressure Switch Parts Questions & Experts Answers
Q: What is the purpose of the pressure cycling switch in the air conditioning system on Ford Edge?
A: The pressure cycling switch is located on top of the hard line from the condenser to the air conditioning thermostatic expansion valve (TXV). It detects low refrigerant line pressure and switches the A/C system off, then back on again to provide higher pressure. If the pressure increases too high, the pressure cut-off switch shuts the system off. Before proceeding, have the air conditioning system recovered by a dealer service department or automotive air conditioning shop. Unplug the electrical connector from the pressure cycling switch and unscrew it. Lubricate the switch O-ring with clean refrigerant oil and screw the new switch into place. Reconnect the electrical connector and have the system evacuated, recharged, and leak tested by the shop that discharged it.